# Newbie question

**URL:** <https://forums.maslowcnc.com/t/newbie-question/5079>\
**Category:** No Judgement\
**Created:** [July 22, 2018, 7:37pm UTC](https://forums.maslowcnc.com/t/newbie-question/5079 "2018-07-22T19:37:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![trynna](https://avatars.discourse-cdn.com/v4/letter/t/c68b51/32.png) [@trynna](https://forums.maslowcnc.com/u/trynna)\
**Post date:** [July 22, 2018, 7:37pm UTC](https://forums.maslowcnc.com/t/newbie-question/5079/1 "2018-07-22T19:37:55Z")

</div>

just got my machine all built and put together. what is my next step as far as hooking up laptop etc is there somewhere to find these steps? and do i need to download anything first? this is all greek to me.

---

<div class="post-metadata">

**Author:** ![Scooter](https://avatars.discourse-cdn.com/v4/letter/s/b5a626/32.png) [@Scooter](https://forums.maslowcnc.com/u/Scooter)\
**Post date:** [July 22, 2018, 8:05pm UTC](https://forums.maslowcnc.com/t/newbie-question/5079/2 "2018-07-22T20:05:33Z")

</div>

What step are you on? Have you been following [https://www.maslowcnc.com/assemblyguide/](https://www.maslowcnc.com/assemblyguide/) ?

I’m not there yet, but you roughly should:

1. Build frame.
2. Assemble the Arduino/sled and other electronics.
3. Upload the firmware to the Arduino.
4. Set up a win/mac/linux/rPie computer to run ground control.
5. Connect the PC to the Arduino and calibrate.
6. Load g-code and cut something, probably the sled.

Up to step 4 use the above link. After that look on the forums, the ground control guide, there are a couple of youtube vids and use the wiki. (at least that’s my plan) I think GroundControl will walk you through the calibration when you select it from the menu.

> **[MaslowCNC/GroundControl](https://github.com/MaslowCNC/GroundControl/wiki/Ground-Control-Users-Guide)**
>
> This is the Ground Control software used to control the Maslow CNC Machine - MaslowCNC/GroundControl

> **[MaslowCNC](https://github.com/MaslowCNC)**
>
> MaslowCNC has 4 repositories available. Follow their code on GitHub.

---

<div class="post-metadata">

**Author:** ![trynna](https://avatars.discourse-cdn.com/v4/letter/t/c68b51/32.png) [@trynna](https://forums.maslowcnc.com/u/trynna)\
**Post date:** [July 22, 2018, 8:12pm UTC](https://forums.maslowcnc.com/t/newbie-question/5079/3 "2018-07-22T20:12:47Z")

</div>

thank you!

---

<div class="post-metadata">

**Author:** ![scottscnc](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/scottscnc/32/7556_2.png) [@scottscnc](https://forums.maslowcnc.com/u/scottscnc)\
**Post date:** [July 22, 2018, 8:30pm UTC](https://forums.maslowcnc.com/t/newbie-question/5079/4 "2018-07-22T20:30:23Z")

</div>

YouTube can be your friend. Lol a lot of people on there with steps from start to finish. Helped me a bunch.
