# Noise suppression/Adhesion with shelving liner material

**URL:** <https://forums.maslowcnc.com/t/noise-suppression-adhesion-with-shelving-liner-material/12750>\
**Category:** No Judgement\
**Created:** [March 26, 2020, 6:52pm UTC](https://forums.maslowcnc.com/t/noise-suppression-adhesion-with-shelving-liner-material/12750 "2020-03-26T18:52:40Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [March 26, 2020, 7:23pm UTC](https://forums.maslowcnc.com/t/noise-suppression-adhesion-with-shelving-liner-material/12750/2 "2020-03-26T19:23:15Z")

</div>

the only problem could be if it makes the workpiece uneven as it compresses  
differently where you anchor the workpiece down

but in general it should work, and it’s sure worth doing a test on to see what  
difference it makes.

for me, the shop vac is louder than the router

David Lang

---

_[View the full topic](https://forums.maslowcnc.com/t/noise-suppression-adhesion-with-shelving-liner-material/12750)._