# Not cutting right

**URL:** <https://forums.maslowcnc.com/t/not-cutting-right/6729>\
**Category:** Troubleshooting\
**Created:** [September 15, 2018, 6:23pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729 "2018-09-15T18:23:19Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![jccustoms](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jccustoms](https://forums.maslowcnc.com/u/jccustoms)\
**Post date:** [September 15, 2018, 6:23pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729/1 "2018-09-15T18:23:19Z")

</div>

Everything that I’ve cut on the Maslow so far has been off I cut a hole with a peg that needs to fit in the hole and it’s off by like 3 in my slots or like quarter inch gaps don’t fit together snug everything seems to be right in the drawing programs but as soon as I put it in the ground control and cut Nothing fits together please help

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [September 15, 2018, 10:00pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729/2 "2018-09-15T22:00:00Z")

</div>

Have you done the calibration?

---

<div class="post-metadata">

**Author:** ![jccustoms](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jccustoms](https://forums.maslowcnc.com/u/jccustoms)\
**Post date:** [September 15, 2018, 10:11pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729/3 "2018-09-15T22:11:10Z")

</div>

Did all my calibration everything went great

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [September 15, 2018, 10:13pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729/4 "2018-09-15T22:13:12Z")

</div>

can you post your distance between motors, motor offset height, rotation radius and chain sag correction?

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [September 15, 2018, 10:13pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729/5 "2018-09-15T22:13:49Z")

</div>

You might get limited on posting since you just joined. You can pm me.

---

<div class="post-metadata">

**Author:** ![jccustoms](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jccustoms](https://forums.maslowcnc.com/u/jccustoms)\
**Post date:** [September 15, 2018, 10:28pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729/6 "2018-09-15T22:28:19Z")

</div>

Yes I can it might be a minute before I get home though

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [September 15, 2018, 10:47pm UTC](https://forums.maslowcnc.com/t/not-cutting-right/6729/7 "2018-09-15T22:47:08Z")

</div>

Also post the file you are trying to cut… to make sure the problem is not there.