# Odd cut when cutting test shape

**URL:** <https://forums.maslowcnc.com/t/odd-cut-when-cutting-test-shape/3230>\
**Category:** Troubleshooting\
**Created:** [April 9, 2018, 4:23pm UTC](https://forums.maslowcnc.com/t/odd-cut-when-cutting-test-shape/3230 "2018-04-09T16:23:48Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Cbolt360](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cbolt360/32/8152_2.png) [@Cbolt360](https://forums.maslowcnc.com/u/Cbolt360)\
**Post date:** [April 9, 2018, 5:10pm UTC](https://forums.maslowcnc.com/t/odd-cut-when-cutting-test-shape/3230/3 "2018-04-09T17:10:37Z")

</div>

Thanks for the quick response. No there is nothing mechanical for the sled to come into contact with there. And yes it has some sort of messed up cut in that area regardless of where it is cut. It is worth mentioning in GC when this happens it shows two illustrations of the sled while cutting like it’s out of sync then syncs back up.

Here they are in zip format  
[Help.zip](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/c/c51336e667591f57f8a4772f1fe7fa646418b316.zip) (674.5 KB)  
.

---

_[View the full topic](https://forums.maslowcnc.com/t/odd-cut-when-cutting-test-shape/3230)._