# Panel PC good enough? **URL:** \ **Category:** Software\ **Created:** [October 25, 2019, 4:43pm UTC](https://forums.maslowcnc.com/t/panel-pc-good-enough/11456 "2019-10-25T16:43:49Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![garrett1812](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/garrett1812/32/14800_2.png) [@garrett1812](https://forums.maslowcnc.com/u/garrett1812)\ **Post date:** [October 25, 2019, 4:43pm UTC](https://forums.maslowcnc.com/t/panel-pc-good-enough/11456/1 "2019-10-25T16:43:49Z")
I have a nice panel mount touchscreen PC that salvaged and would like to build into my Maslow, but can someone please share their opinion if it will cut it, before I invest into building into the frame. Thanks. Intel Atom 1.6Ghz single core 2gb ram Intel GMA 500 video 8GB compact flash VGA display (640x480) Windows 7 Embedded ---
**Author:** ![btodcox](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/btodcox/32/14697_2.png) [@btodcox](https://forums.maslowcnc.com/u/btodcox)\ **Post date:** [October 25, 2019, 6:39pm UTC](https://forums.maslowcnc.com/t/panel-pc-good-enough/11456/2 "2019-10-25T18:39:09Z")
I would guess you will be fine as long as you only do not run apps other than Ground Control while your Maslow is running. I use an old laptop with a Pentium B940 @ 2GHz with 4GB memory running Windows 7 for my Maslow. Aside from needing a little patience when booting and opening apps, it works well for me. ---
**Author:** ![garrett1812](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/garrett1812/32/14800_2.png) [@garrett1812](https://forums.maslowcnc.com/u/garrett1812)\ **Post date:** [October 29, 2019, 11:33pm UTC](https://forums.maslowcnc.com/t/panel-pc-good-enough/11456/3 "2019-10-29T23:33:40Z")
Well, looks like it won’t work. The Intel GMA 500 does not support OpenGL 2.0. I have another laptop that will work, but too bad I couldn’t build in this panel mount pc. Will have to find another project for it.