# Panelizing big projects to fit Maslow size **URL:** \ **Category:** Ground Control\ **Created:** [March 15, 2021, 5:35pm UTC](https://forums.maslowcnc.com/t/panelizing-big-projects-to-fit-maslow-size/16290 "2021-03-15T17:35:57Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![kiklo](https://avatars.discourse-cdn.com/v4/letter/k/bcef8e/32.png) [@kiklo](https://forums.maslowcnc.com/u/kiklo)\ **Post date:** [March 15, 2021, 5:35pm UTC](https://forums.maslowcnc.com/t/panelizing-big-projects-to-fit-maslow-size/16290/1 "2021-03-15T17:35:57Z")
Hi. Are there any thoughts on auto-panelizing in GroundControl ? To my knowledge it is a common feature on SW for smaller CNC’s. Any workarounds ? Br. Kim ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [March 16, 2021, 4:42pm UTC](https://forums.maslowcnc.com/t/panelizing-big-projects-to-fit-maslow-size/16290/2 "2021-03-16T16:42:39Z")
Do you have any examples of software that you like? I can give it a look. ---
**Author:** ![kiklo](https://avatars.discourse-cdn.com/v4/letter/k/bcef8e/32.png) [@kiklo](https://forums.maslowcnc.com/u/kiklo)\ **Post date:** [March 16, 2021, 5:05pm UTC](https://forums.maslowcnc.com/t/panelizing-big-projects-to-fit-maslow-size/16290/3 "2021-03-16T17:05:40Z")
A friend of mine uses Vcarve there you can. My use would be for drawing scalemodel-race-tracks. So when my track plane is 6x2.4 m it needs to be parted into several ‘Maslow-sheets’. Having the GC to take care of that would be great. I’m thinking like you get an ‘overlay-grid’ of you M-work size on your whole drawing. Then you point into the ‘tile’ you want to route and set origo/start and go. Then you change sheet and point again to next tile and set origo/start and so on. Probably an overoptimistic thought but still. Br. Kim