# Parametric Plant Stand

**URL:** <https://forums.maslowcnc.com/t/parametric-plant-stand/25578>\
**Category:** Projects\
**Created:** [March 2, 2026, 11:26pm UTC](https://forums.maslowcnc.com/t/parametric-plant-stand/25578 "2026-03-02T23:26:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 2, 2026, 11:26pm UTC](https://forums.maslowcnc.com/t/parametric-plant-stand/25578/1 "2026-03-02T23:26:46Z")

</div>

I had some scrap plywood left over from the lamp project that was taking up space in my garage so I decided to make some plant stands.

 ![AF7AEB67-F0F4-4AF0-B2F3-9474A94200DD](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/e/c/ec4430455e824d9c83a8a830780b0256ef932be0.jpeg)

 ![33A8D883-E93D-4BFF-8B49-1EA3F9E5D70D](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/a/8/a8c4f9bb85e8c14b025c92b7fd8e1258a2f37961.jpeg)

I also used it as a chance to test using a roundover bit to round the edges on parts after cutting them out. I had done that before but only using a router table and I wanted to see how easy it was to do by hand (very easy).

The whole thing is a parametric model in Abundance which lets you set the parameters you want and will give you gcode ready to cut along with a .stl file for the 3D printed parts.

Check it out here:

[https://abundance.maslowcnc.com/run/BarbourSmith/Parametric\_Plant\_Stand](https://abundance.maslowcnc.com/run/BarbourSmith/Parametric_Plant_Stand)