# Piezas dañadas con grietas recibidas **URL:** \ **Category:** Uncategorized\ **Created:** [May 4, 2026, 5:45pm UTC](https://forums.maslowcnc.com/t/piezas-danadas-con-grietas-recibidas/25748 "2026-05-04T17:45:23Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![julio\_perez](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/julio_perez/32/29186_2.png) [@julio\_perez](https://forums.maslowcnc.com/u/julio_perez)\ **Post date:** [May 4, 2026, 5:45pm UTC](https://forums.maslowcnc.com/t/piezas-danadas-con-grietas-recibidas/25748/1 "2026-05-04T17:45:23Z")
hace un mes mas o menos recibi mi maslow con mucha ilusion hace una semana comence a armarlo pero al ir viendo con detalle encontre fisuras en la base del trineo y en los refuerzos que van en las barillas del eje z ojala no me den problemas al llegar a casa compartire fotografias anoche las encontre y no pude tomarlas por la falta de lus natural para que se aprecien bien no se que problema me podran traer pero les comento para ver que solucion puede darme gracias ---
**Author:** ![Bones](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bones/32/31023_2.png) [@Bones](https://forums.maslowcnc.com/u/Bones)\ **Post date:** [May 4, 2026, 6:30pm UTC](https://forums.maslowcnc.com/t/piezas-danadas-con-grietas-recibidas/25748/2 "2026-05-04T18:30:28Z")
Translated > ​About a month ago, more or less, I received my Maslow with great excitement. A week ago I started assembling it, but as I was looking at it in detail, I found cracks in the base of the sled and in the reinforcements that go on the Z-axis rods. Hopefully, they won’t cause me problems. When I get home, I will share photos; I found them last night and couldn’t take [the photos] because of the lack of natural light to see them well. I don’t know what problems they might cause me, but I’m telling you all to see what solution you can give me. Thanks. ​ ---
**Author:** ![Bones](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bones/32/31023_2.png) [@Bones](https://forums.maslowcnc.com/u/Bones)\ **Post date:** [May 4, 2026, 6:35pm UTC](https://forums.maslowcnc.com/t/piezas-danadas-con-grietas-recibidas/25748/3 "2026-05-04T18:35:59Z")
I have replaced the 4 support legs and the top and bottom router clamps with 3D printed versions, the STL’s are available here on the forums. The printed legs on here are a bit shorter than stock, but a much more robust design. The Turtle Clamp appears to be a major improvement from the stock clamps. This clamp setup will require a few pieces of aftermarket hardware, but its worth it. ---
**Author:** ![julio\_perez](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/julio_perez/32/29186_2.png) [@julio\_perez](https://forums.maslowcnc.com/u/julio_perez)\ **Post date:** [May 4, 2026, 7:29pm UTC](https://forums.maslowcnc.com/t/piezas-danadas-con-grietas-recibidas/25748/4 "2026-05-04T19:29:15Z")
si ? y donde puedo encontrarlas para evaluar si las puedo enviar a imprimir solo que aca en mi pais las impresiones 3d son muy costosas ---
**Author:** ![Bones](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bones/32/31023_2.png) [@Bones](https://forums.maslowcnc.com/u/Bones)\ **Post date:** [May 4, 2026, 7:41pm UTC](https://forums.maslowcnc.com/t/piezas-danadas-con-grietas-recibidas/25748/5 "2026-05-04T19:41:48Z")
> [@Maslow 4 3D printed parts thread](https://forums.maslowcnc.com/t/maslow-4-3d-printed-parts-thread/20627/73): > > I just used PLA, nothings heat critical, so I don’t think it matters much ---
**Author:** ![Bones](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bones/32/31023_2.png) [@Bones](https://forums.maslowcnc.com/u/Bones)\ **Post date:** [May 4, 2026, 7:43pm UTC](https://forums.maslowcnc.com/t/piezas-danadas-con-grietas-recibidas/25748/6 "2026-05-04T19:43:32Z")
Scroll up and you will find the turtle clamp and support posts.