# Please advise on motor gear

**URL:** <https://forums.maslowcnc.com/t/please-advise-on-motor-gear/9684>\
**Category:** Uncategorized\
**Created:** [April 28, 2019, 6:42pm UTC](https://forums.maslowcnc.com/t/please-advise-on-motor-gear/9684 "2019-04-28T18:42:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jimr](https://avatars.discourse-cdn.com/v4/letter/j/0ea827/32.png) [@Jimr](https://forums.maslowcnc.com/u/Jimr)\
**Post date:** [April 28, 2019, 6:42pm UTC](https://forums.maslowcnc.com/t/please-advise-on-motor-gear/9684/1 "2019-04-28T18:42:43Z")

</div>

Hi,  
i have 2 motors with bad gears. I have spares for gear to chain but dont see option to buy gears to screw drive of motor. Can I buy these or do I have to buy another motor like last time this gear failed.  
thx

---

<div class="post-metadata">

**Author:** ![vancek](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/vancek/32/12312_2.png) [@vancek](https://forums.maslowcnc.com/u/vancek)\
**Post date:** [April 28, 2019, 6:44pm UTC](https://forums.maslowcnc.com/t/please-advise-on-motor-gear/9684/2 "2019-04-28T18:44:59Z")

</div>

Is this the gear you’re talking about?

> **[Motor Gear Upgrade](https://maslowsurplusparts.com/products/motor-gear-upgrade?variant=18270942494833)**
>
> \*Please, only 4 gears per customer, there is a limited stock and the Original Maslow Team asked us to keep these priced low for distribution to folks with older motors\* One upgraded internal motor gear to replace the gear in Maslow motors that most...

---

<div class="post-metadata">

**Author:** ![Jimr](https://avatars.discourse-cdn.com/v4/letter/j/0ea827/32.png) [@Jimr](https://forums.maslowcnc.com/u/Jimr)\
**Post date:** [April 30, 2019, 10:48am UTC](https://forums.maslowcnc.com/t/please-advise-on-motor-gear/9684/3 "2019-04-30T10:48:52Z")

</div>

wrong gear. gear needed is to screw drive of motor. open motor, first gear slides out, gear below is blown gear. thx

---

<div class="post-metadata">

**Author:** ![Metalmaslow](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@Metalmaslow](https://forums.maslowcnc.com/u/Metalmaslow)\
**Post date:** [April 30, 2019, 1:12pm UTC](https://forums.maslowcnc.com/t/please-advise-on-motor-gear/9684/4 "2019-04-30T13:12:23Z")

</div>

I doubt the manufacturer would sell just that gear and no one else sells it that I know of, so best to just buy a whole new motor.

---

<div class="post-metadata">

**Author:** ![technobrigade](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/technobrigade/32/12825_2.png) [@technobrigade](https://forums.maslowcnc.com/u/technobrigade)\
**Post date:** [May 6, 2019, 10:38am UTC](https://forums.maslowcnc.com/t/please-advise-on-motor-gear/9684/5 "2019-05-06T10:38:29Z")

</div>

We doubt the manufacturer would just sell gear. Just buy new motor.