# Portable EMT/Printed/Wood/MakerPipe frame ideas

**URL:** <https://forums.maslowcnc.com/t/portable-emt-printed-wood-makerpipe-frame-ideas/20973>\
**Category:** Frame\
**Created:** [May 7, 2024, 1:41am UTC](https://forums.maslowcnc.com/t/portable-emt-printed-wood-makerpipe-frame-ideas/20973 "2024-05-07T01:41:42Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Carson\_Barry](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/carson_barry/32/23367_2.png) [@Carson\_Barry](https://forums.maslowcnc.com/u/Carson_Barry)\
**Post date:** [June 7, 2024, 2:53pm UTC](https://forums.maslowcnc.com/t/portable-emt-printed-wood-makerpipe-frame-ideas/20973/9 "2024-06-07T14:53:30Z")

</div>

This condenses down to 27"x54"x9" and is basically just a mini version of the wooden frame recommended by Bar with a 24" square working area and can be stood up or laid down. Not sure if you need a larger work area for this venture. I’m told the cross braces on the top and bottom of the frame might be overkill, but I wanted maximum rigidity.

> [@M4 Minimum Frame Size?](https://forums.maslowcnc.com/t/m4-minimum-frame-size/21277/13):
>
> Expanded the mounting surface to a 3’x3’ area and added the missing parts to the assembly. Also added a reference for the working area and sled (green square, yellow circle).

---

_[View the full topic](https://forums.maslowcnc.com/t/portable-emt-printed-wood-makerpipe-frame-ideas/20973)._