# Porting grbl and upgraded non arduino micros

**URL:** <https://forums.maslowcnc.com/t/porting-grbl-and-upgraded-non-arduino-micros/12289>\
**Category:** Software\
**Tags:** firmware, 32-bit, maslow-micro\
**Created:** [February 2, 2020, 1:58am UTC](https://forums.maslowcnc.com/t/porting-grbl-and-upgraded-non-arduino-micros/12289 "2020-02-02T01:58:08Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [February 2, 2020, 2:37am UTC](https://forums.maslowcnc.com/t/porting-grbl-and-upgraded-non-arduino-micros/12289/2 "2020-02-02T02:37:12Z")

</div>

This is absolutly something on my long term roadmap. I’m thinking the ESP32 is the ideal target. There is a port of GRBL [to the ESP32 here](https://github.com/bdring/Grbl_Esp32) which looks great and is actively maintained. The dream would be a modified version of Webcontrol running directly on the ESP32. I’ve been working on a redesigned controller board which you can read about here:

> [@Thoughts on designing a new controller](https://forums.maslowcnc.com/t/thoughts-on-designing-a-new-controller/10453):
>
> I really like the idea of Web Ground Control and I absolutely think something like that is the future. I would like to start designing a controller specifically to work with Web Ground Control. CNCs using stepper motors are VERY sensitive to timing because the motors require precise and high frequency pulses to move. A closed loop system like ours should be a lot more forgiving about timing (especially if the processor is much faster than the motors) so I think we may be able to get rid of the …

Progress is slow right now because Create is my main focus, but I would absolutely love any help that anyone can offer.

---

_[View the full topic](https://forums.maslowcnc.com/t/porting-grbl-and-upgraded-non-arduino-micros/12289)._
