# Problem with implementing Ground Control on Raspberry Pi **URL:** \ **Category:** Troubleshooting\ **Created:** [November 5, 2018, 9:03pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594 "2018-11-05T21:03:43Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![johnL](https://avatars.discourse-cdn.com/v4/letter/j/dec6dc/32.png) [@johnL](https://forums.maslowcnc.com/u/johnL)\ **Post date:** [November 5, 2018, 9:03pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594/1 "2018-11-05T21:03:43Z")
I’m attempting to follow the instructions for ‘Installing Ground Control’ is the Assembly Guide. I’m trying to install Ground Control on a Raspberry Pi 3B+. I follow Step 1 to download the KivyPie zip file (v 1.0) to my Windows 10 PC. I use Etcher to transfer the zip file to the SD disc. After the transfer, I can view the SD disc in Explorer and it appears to be OK. However, when I put the SD disc in the Raspberry Pi and connect the power, I get stuck on the ‘rainbow’ screen. The system never progresses beyond that. Has anyone else encounter this problem? Note that I’ve also downloaded the Raspian Stretch with Desktop zip file and loaded it successfully on the Pi, but after doing all the downloading, etc for Ground Control as indicated in the Assembly Guide, running Ground Control crashes with a segmentation fault. So I’m attempting to use the KivyPie download to avoid the problems with trying to modify Stretch. Any help/thoughts/suggestions would be appreciated. ---
**Author:** ![MakerMadeCNC](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/makermadecnc/32/22370_2.png) [@MakerMadeCNC](https://forums.maslowcnc.com/u/MakerMadeCNC)\ **Post date:** [November 5, 2018, 9:42pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594/2 "2018-11-05T21:42:34Z")
It appears that the latest KivyPie image is not compatible with the 3B+ I have thrown some time at installing it on Raspian Stretch with no success as well. I think @Bee has it running on Ubuntu. ---
**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\ **Post date:** [November 5, 2018, 9:54pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594/3 "2018-11-05T21:54:48Z")
Yes - I have the current GC running on my Ubuntu image after updating Kivy to deal with the new Pillow requirements. Thank you ---
**Author:** ![aluminumwelder](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aluminumwelder/32/9362_2.png) [@aluminumwelder](https://forums.maslowcnc.com/u/aluminumwelder)\ **Post date:** [December 30, 2018, 7:18pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594/4 "2018-12-30T19:18:16Z")
Is it possible to share a working Rasp pi 3 or 3+ image so people can just download it and clone it onto their micro SD card so they can be quickly be up and running. It would save raspberry pi Noobs like me a lot of time figuring out how to install all the software. perhaps using google drive or dropbox or some other free service? any help greatly appreciated! ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [December 30, 2018, 7:27pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594/5 "2018-12-30T19:27:14Z")
Have you seen this? > [@Looking for "Alpha" Testers for Web-Based Ground Control](https://forums.maslowcnc.com/t/looking-for-alpha-testers-for-web-based-ground-control/7664): > > I’m looking for people that are using, or wanting to use, a Raspberry Pi to run Ground Control that would be interested in alpha-testing a web-based version (i.e., no Kivy involved) we call “webcontrol”. In cooperation with @johnboiles, we’ve manged to put together a couple of docker files that simplify the installation, starting, and upgrading process. I’m calling it in alpha condition because only two of us have put it to use. I feel good about the condition of the software, but until a few… ---
**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\ **Post date:** [December 30, 2018, 10:23pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594/6 "2018-12-30T22:23:03Z")
Check out this thread for the open beta web-based ground control: > [@WebControl Open Beta](https://forums.maslowcnc.com/t/webcontrol-open-beta/8234): > > After a lot of testing, I’ve decided to go ahead and release WebControl as an open beta project. A bit of a belated present. As very brief overview, WebControl is a web-based version of Ground Control primarily designed to run on a Raspberry Pi in a headless environment (headless meaning no screen/keyboard attached). There’s no reason that it won’t run on Windows, MacOS, etc. but the focus right now is on the RPi. The simplest way to get started is to use a fresh SD card and download the pre-… It was developed on using the raspberry pi and there is an image available.