# Problem with implementing Ground Control on Raspberry Pi

**URL:** <https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594>\
**Category:** Troubleshooting\
**Created:** [November 5, 2018, 9:03pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594 "2018-11-05T21:03:43Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [December 30, 2018, 10:23pm UTC](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594/6 "2018-12-30T22:23:03Z")

</div>

Check out this thread for the open beta web-based ground control:

> [@WebControl Open Beta](https://forums.maslowcnc.com/t/webcontrol-open-beta/8234):
>
> After a lot of testing, I’ve decided to go ahead and release WebControl as an open beta project. A bit of a belated present. As very brief overview, WebControl is a web-based version of Ground Control primarily designed to run on a Raspberry Pi in a headless environment (headless meaning no screen/keyboard attached). There’s no reason that it won’t run on Windows, MacOS, etc. but the focus right now is on the RPi. The simplest way to get started is to use a fresh SD card and download the pre-…

It was developed on using the raspberry pi and there is an image available.

---

_[View the full topic](https://forums.maslowcnc.com/t/problem-with-implementing-ground-control-on-raspberry-pi/7594)._