# Random M4 setup questions

**URL:** <https://forums.maslowcnc.com/t/random-m4-setup-questions/25032>\
**Category:** No Judgement\
**Tags:** m4\
**Created:** [October 10, 2025, 6:48pm UTC](https://forums.maslowcnc.com/t/random-m4-setup-questions/25032 "2025-10-10T18:48:30Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rich\_Morin](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/rich_morin/32/27433_2.png) [@Rich\_Morin](https://forums.maslowcnc.com/u/Rich_Morin)\
**Post date:** [October 10, 2025, 6:48pm UTC](https://forums.maslowcnc.com/t/random-m4-setup-questions/25032/1 "2025-10-10T18:48:30Z")

</div>

Still waiting for a few wet days to finish assembling my M4. Meanwhile, I have a couple of questions:

In a vertical mounting setup, can the long dimension of the plywood sheet be vertical? FWIW, I have a shed with a 10’ tall outside wall.

Has anyone looked into using a Maslow to carve traces in PCBs (printed circuit boards)?

Do we have any idea of the “success rate” of M4 builds?

-r

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [October 10, 2025, 7:10pm UTC](https://forums.maslowcnc.com/t/random-m4-setup-questions/25032/2 "2025-10-10T19:10:04Z")

</div>

Rich Morin wrote:

> In a vertical mounting setup, can the long dimension of the plywood sheet be vertical? FWIW, I have a shed with a 10’ tall outside wall.

Yes, but you need to get at the top anchors a LOT right now (patches in the next  
release to reduce that, but it will still be far more than you would like

> Has anyone looked into using a Maslow to carve traces in PCBs (printed circuit boards)?

not that I’ve heard of. It may be possible, or there may be enough flex in it to  
not be precise enough

> Do we have any idea of the “success rate” of M4 builds?

no, we don’t know how many people who don’t report here succeeded vs how many  
gave up

we do know that the vast majority of the people who show up here are able to get  
going with help (although there are some who give up)

David Lang

---

<div class="post-metadata">

**Author:** ![Dano](https://avatars.discourse-cdn.com/v4/letter/d/e0b2c6/32.png) [@Dano](https://forums.maslowcnc.com/u/Dano)\
**Post date:** [October 13, 2025, 2:06am UTC](https://forums.maslowcnc.com/t/random-m4-setup-questions/25032/3 "2025-10-13T02:06:34Z")

</div>

I’m imagining a 4’ x 8’ PCB …

Lol

Dano

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [October 13, 2025, 3:52am UTC](https://forums.maslowcnc.com/t/random-m4-setup-questions/25032/4 "2025-10-13T03:52:57Z")

</div>

Dano wrote:

> I’m imagining a 4’ x 8’ PCB …

I actually have a need to do something like this, probably with several PCBs,  
that would end up as a ~1’x3’ area

(a fireworks control panel, lots of 1/2" pads connected to a 50 pin connector)

David Lang

---

<div class="post-metadata">

**Author:** ![Rich\_Morin](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/rich_morin/32/27433_2.png) [@Rich\_Morin](https://forums.maslowcnc.com/u/Rich_Morin)\
**Post date:** [October 13, 2025, 5:34am UTC](https://forums.maslowcnc.com/t/random-m4-setup-questions/25032/5 "2025-10-13T05:34:29Z")

</div>

FWIW, I keep thinking about mounting a small (e.g., 20W) laser on the M4. That should have less problems with Z-axis slop…

-r

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [October 13, 2025, 5:54am UTC](https://forums.maslowcnc.com/t/random-m4-setup-questions/25032/6 "2025-10-13T05:54:20Z")

</div>

Rich Morin wrote:

> FWIW, I keep thinking about mounting a small (e.g., 20W) laser on the M4. That should have less problems with Z-axis slop…

Just make sure it’s suitably enclosed. you will be able to run your maslow all  
the way down at z-stop all the time to you have no gap to be dangerous.

however, keep in mind that the maslow moves VERY slow compared to a laser.

David Lang
