# Rigid Router & Base Plate Dimensions

**URL:** <https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777>\
**Category:** Hardware\
**Created:** [March 20, 2018, 1:06am UTC](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777 "2018-03-20T01:06:08Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![Keith](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/keith/32/1332_2.png) [@Keith](https://forums.maslowcnc.com/u/Keith)\
**Post date:** [April 23, 2018, 1:35am UTC](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777/21 "2018-04-23T01:35:31Z")

</div>

> [@Weps](#):
>
> 4.625" diameter

So, 4.625" worked for your final diameter (4-5/8")? Awesome, and thank you!

---

<div class="post-metadata">

**Author:** ![Weps](https://avatars.discourse-cdn.com/v4/letter/w/ce73a5/32.png) [@Weps](https://forums.maslowcnc.com/u/Weps)\
**Post date:** [April 24, 2018, 3:17am UTC](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777/22 "2018-04-24T03:17:02Z")

</div>

Yep; 4.625" diameter with 120° spacing 🕶  
Does anyone have a link on how to get Draftsight to plot 1:1?

---

<div class="post-metadata">

**Author:** ![ellamacrow](https://avatars.discourse-cdn.com/v4/letter/e/54ee81/32.png) [@ellamacrow](https://forums.maslowcnc.com/u/ellamacrow)\
**Post date:** [February 12, 2021, 3:52pm UTC](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777/23 "2021-02-12T15:52:45Z")

</div>

I ordered 2-inch replacement screws[.](https://gearstips.com/) Too much is better than too little:wink: too much is better:

[Previous page](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777.md?page=1)