# Rigid Router & Base Plate Dimensions

**URL:** <https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777>\
**Category:** Hardware\
**Created:** [March 20, 2018, 1:06am UTC](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777 "2018-03-20T01:06:08Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Weps](https://avatars.discourse-cdn.com/v4/letter/w/ce73a5/32.png) [@Weps](https://forums.maslowcnc.com/u/Weps)\
**Post date:** [March 20, 2018, 3:12am UTC](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777/3 "2018-03-20T03:12:29Z")

</div>

> [@Bee](#):
>
> How is the thickness relevant to making a sled template?

I finally got around to explaining it all here:

> [@Possible "Table Round" Sled](https://forums.maslowcnc.com/t/possible-table-round-sled/2780):
>
> I intend to explore the possibility of using a ready made table top as a sled for my Maslow. The intent is something that could skip the temporary sled and be made along with the frame while people are waiting for their kits to arrive: [https://www.homedepot.com/p/Edge-Glued-Round-Common-1-in-x-17-3-4-in-Actual-1-0-in-x-17-75-in-680435/202017011](https://www.homedepot.com/p/Edge-Glued-Round-Common-1-in-x-17-3-4-in-Actual-1-0-in-x-17-75-in-680435/202017011) As with anything there are some trade-offs. The table round is the correct diameter and the edges are already rounded. It is thicker than the stock s…

Thanks!

---

_[View the full topic](https://forums.maslowcnc.com/t/rigid-router-base-plate-dimensions/2777)._
