# Ring Height for C-Beam Z axis

**URL:** <https://forums.maslowcnc.com/t/ring-height-for-c-beam-z-axis/13511>\
**Category:** Troubleshooting\
**Tags:** sled, ring, balance\
**Created:** [May 26, 2020, 5:01pm UTC](https://forums.maslowcnc.com/t/ring-height-for-c-beam-z-axis/13511 "2020-05-26T17:01:12Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Metalmaslow](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@Metalmaslow](https://forums.maslowcnc.com/u/Metalmaslow)\
**Post date:** [May 28, 2020, 3:46pm UTC](https://forums.maslowcnc.com/t/ring-height-for-c-beam-z-axis/13511/7 "2020-05-28T15:46:40Z")

</div>

looks like your spoil board is 3/4", the material is 1/2" and the sled is 3/4" which is 2" total and the ring height is typically 3" so 5" would be a better off set than the 6" you have, but probabaly not a deal breaker.

---

_[View the full topic](https://forums.maslowcnc.com/t/ring-height-for-c-beam-z-axis/13511)._