# Rose V-carving with all standard Maslow

**URL:** <https://forums.maslowcnc.com/t/rose-v-carving-with-all-standard-maslow/588>\
**Category:** Projects\
**Created:** [September 1, 2017, 7:05pm UTC](https://forums.maslowcnc.com/t/rose-v-carving-with-all-standard-maslow/588 "2017-09-01T19:05:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Blsteinhauer88](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blsteinhauer88/32/2606_2.png) [@Blsteinhauer88](https://forums.maslowcnc.com/u/Blsteinhauer88)\
**Post date:** [September 1, 2017, 7:05pm UTC](https://forums.maslowcnc.com/t/rose-v-carving-with-all-standard-maslow/588/1 "2017-09-01T19:05:54Z")

</div>

I remember the question was asked a while ago about the vcarve abilities. I think @dlang was interested. I decided to give it a shot today. @Gero mentioned a program called F-engrave. Simple neet program. I grabbed a line art of a rose plugged in my bbit values and created a G code from F-engrave. Loaded it into ground control and this is what I got. It was done with a cheap Harbor freight bit on a scrap piece of plywood to see if it works. I’m sure it’ll look nicer on a solid piece of wood.

 ![IMG_0422](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/1X/342f69e47be587f286db7b971ac83c984ef1bdb8.JPG)

---

<div class="post-metadata">

**Author:** ![mooselake](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mooselake/32/6218_2.png) [@mooselake](https://forums.maslowcnc.com/u/mooselake)\
**Post date:** [September 2, 2017, 4:50pm UTC](https://forums.maslowcnc.com/t/rose-v-carving-with-all-standard-maslow/588/2 "2017-09-02T16:50:48Z")

</div>

Could be fun to try some v-carved lettering too.