# Router Recommendation (Australia)

**URL:** <https://forums.maslowcnc.com/t/router-recommendation-australia/1075>\
**Category:** Hardware\
**Created:** [November 16, 2017, 1:55am UTC](https://forums.maslowcnc.com/t/router-recommendation-australia/1075 "2017-11-16T01:55:01Z")\
**Posts on this page:** 1\
**Showing post:** 173

<div class="post-metadata">

**Author:** ![Jetstar](https://avatars.discourse-cdn.com/v4/letter/j/dfb087/32.png) [@Jetstar](https://forums.maslowcnc.com/u/Jetstar)\
**Post date:** [August 19, 2018, 10:49pm UTC](https://forums.maslowcnc.com/t/router-recommendation-australia/1075/173 "2018-08-19T22:49:21Z")

</div>

I brought the bosch pof 1200 ae, used 3d printed parts file supplied by @Ned, a 250mm x 8mm lead screw that i cut 30mm off to fit and 8mm coupler. Seems to be working great. This guide is brilliant. Hope this helps.

> [@Bosch POF 1200 z-axis conversion guide](https://forums.maslowcnc.com/t/bosch-pof-1200-z-axis-convertion-guide/5154):
>
> This is the guide to convert your Bosch POF 1200 (or POF 1400) to fit in the ring, and to accept a z-axis. If you’re using a linkage kit, like @dlang 's you don’t need to cut off the handles. You can find the files to [print your own over here](https://forums.maslowcnc.com/t/bosch-pof-1200-ae-height-adjust-modifications/1900) Remove the screw… Pry off the clip with a screwdriver… Remove 4 screws and take off the top cap… Remove blue wire connections from both sides… Remove 4 …

 ![20180817_145527](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/1/131729290536df4c1310c2b5522741e8a607a1d1.jpeg)

---

_[View the full topic](https://forums.maslowcnc.com/t/router-recommendation-australia/1075)._
