# Running the Maslow 4 with DeWalt 240V Router

**URL:** <https://forums.maslowcnc.com/t/running-the-maslow-4-with-dewalt-240v-router/21845>\
**Category:** No Judgement\
**Tags:** alternate-pcb-mount\
**Created:** [July 13, 2024, 4:23am UTC](https://forums.maslowcnc.com/t/running-the-maslow-4-with-dewalt-240v-router/21845 "2024-07-13T04:23:17Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Carson\_Barry](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/carson_barry/32/23367_2.png) [@Carson\_Barry](https://forums.maslowcnc.com/u/Carson_Barry)\
**Post date:** [July 13, 2024, 3:46pm UTC](https://forums.maslowcnc.com/t/running-the-maslow-4-with-dewalt-240v-router/21845/5 "2024-07-13T15:46:29Z")

</div>

> [@Finished building maslow, using only $25 router](https://forums.maslowcnc.com/t/finished-building-maslow-using-only-25-router/21103):
>
> I received the maslow a few days ago in China and can’t wait to finish the build and calibration. Since dewalt611 cannot be purchased in China, I chose Dongcheng router, which is the most common and easily available in China.It only costs $25. The top cover was redesigned to have side cable outlet, and the PCB bracket was mixed to match the top cover. and the casing was 3d printed to reach 69mm diameter。

This person just replaced the housing on the router itself with a 3d printed one that redirects the cable. This may be nicer long term, so I figure it’s worth at least flagging it even though you’re already “solutioned”.

---

_[View the full topic](https://forums.maslowcnc.com/t/running-the-maslow-4-with-dewalt-240v-router/21845)._