# RYOBI 1-1/2 HP router kit help

**URL:** https://forums.maslowcnc.com/t/ryobi-1-1-2-hp-router-kit-help/16992
**Category:** Routers/Spindles
**Created:** [August 12, 2021, 2:31am UTC](https://forums.maslowcnc.com/t/ryobi-1-1-2-hp-router-kit-help/16992 "2021-08-12T02:31:09Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![c00nphrog](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/c00nphrog/32/13632_2.png) [@c00nphrog](https://forums.maslowcnc.com/u/c00nphrog)
#### Post date: [August 13, 2021, 12:24pm UTC](https://forums.maslowcnc.com/t/ryobi-1-1-2-hp-router-kit-help/16992/3 "2021-08-13T12:24:51Z")

</div>

See my response in your other post on this:

> [@RYOBI 1-1/2 hp router help](https://forums.maslowcnc.com/t/ryobi-1-1-2-hp-router-help/16995/5):
>
> Here are the pics of the attachment part for the Ryobi z-axis. You can see on the one side where I was able to cut it down with my Dremel. If you don’t have one, then I am sure a hacksaw or a good file would work too. It is aluminum (I’m pretty sure) and shouldn’t be too hard to shave down. As I said in my last post, I don’t use it on my Maslow any longer due to the fixed RPM being so high. [IMG\_0783] [IMG\_0784]

I uploaded some pics of how I cut down that rectangular block the knob fits over so the motor coupler would fit.

---

_[View the full topic](https://forums.maslowcnc.com/t/ryobi-1-1-2-hp-router-kit-help/16992)._