# Sense check - smaller frame **URL:** \ **Category:** No Judgement\ **Created:** [November 10, 2019, 3:28am UTC](https://forums.maslowcnc.com/t/sense-check-smaller-frame/11585 "2019-11-10T03:28:22Z")\ **Posts on this page:** 1\ **Showing post:** 15
**Author:** ![Metalmaslow](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@Metalmaslow](https://forums.maslowcnc.com/u/Metalmaslow)\ **Post date:** [March 12, 2020, 3:00am UTC](https://forums.maslowcnc.com/t/sense-check-smaller-frame/11585/15 "2020-03-12T03:00:52Z")
> [@Custom Hinged Maslow Build/Vice/Dust Collection/Silencer](https://forums.maslowcnc.com/t/custom-hinged-maslow-build-vice-dust-collection-silencer/7135): > > From day one, I didn’t think I’d cut too many full 4x8 sheets of plywood. I made my frame smaller (4x4) so it didn’t take up the full size all the time. It can, however, still cut a full sheet when and if I wanted to. It’s still a full build minus the huge cutting area. I also made it hinge on the wall (don’t have a lot of space). Noise was also a concern so I made a vacuum silencer for my dust collection. Very little noise and no dust. Pictures of this are below. The only thing left was a goo… --- _[View the full topic](https://forums.maslowcnc.com/t/sense-check-smaller-frame/11585)._