# Shaft Coupler for R2202 eastbaysource

**URL:** <https://forums.maslowcnc.com/t/shaft-coupler-for-r2202-eastbaysource/17159>\
**Category:** Troubleshooting\
**Created:** [September 23, 2021, 2:56pm UTC](https://forums.maslowcnc.com/t/shaft-coupler-for-r2202-eastbaysource/17159 "2021-09-23T14:56:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![vayu.rw](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/vayu.rw/32/19966_2.png) [@vayu.rw](https://forums.maslowcnc.com/u/vayu.rw)\
**Post date:** [September 23, 2021, 2:56pm UTC](https://forums.maslowcnc.com/t/shaft-coupler-for-r2202-eastbaysource/17159/1 "2021-09-23T14:56:18Z")

</div>

I was gifted a full kit maslow CNC for my birthday in Feb 2020, and I have just gotten to opening the box and setting it up. However, I ran into a couple of problems,

1. The Router /z-axis motor shaft coupler seems to be too small to fit the shaft. It fits the router (Ridgid R2202) just fine. I saw some posts earlier that indicated that just use a drill bit and make the hole larger. But I am wary of that solution as, if I were to use a larger drill bit then it would be lose.  
Has anyone had this particular problem ?

2. I think they missed packing the Packet 3 which consists of the s hooks, pulleys and sprockets . Since its been over 6 months would it be possible to get any assistance with getting those parts ?

#eastbaysource

Thanks in advance for any assistance for this.

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [September 23, 2021, 3:26pm UTC](https://forums.maslowcnc.com/t/shaft-coupler-for-r2202-eastbaysource/17159/2 "2021-09-23T15:26:17Z")

</div>

for the s hooks and sprockets that they attach to, go with a clothsline pully  
from your local big box hardware store, it just works better.

David Lang

---

<div class="post-metadata">

**Author:** ![EastBaySource](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/eastbaysource/32/20558_2.png) [@EastBaySource](https://forums.maslowcnc.com/u/EastBaySource)\
**Post date:** [September 23, 2021, 7:04pm UTC](https://forums.maslowcnc.com/t/shaft-coupler-for-r2202-eastbaysource/17159/3 "2021-09-23T19:04:19Z")

</div>

We’re very sorry to hear that your kit was not complete. Expired warranty is not an issue, we will mail you the missing parts ASAP.

Roy