# SketchUp Phlatboyz plugin for Gcode

**URL:** <https://forums.maslowcnc.com/t/sketchup-phlatboyz-plugin-for-gcode/7215>\
**Category:** Found and Shared\
**Created:** [October 10, 2018, 2:48pm UTC](https://forums.maslowcnc.com/t/sketchup-phlatboyz-plugin-for-gcode/7215 "2018-10-10T14:48:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mcmiley](https://avatars.discourse-cdn.com/v4/letter/m/91b2a8/32.png) [@mcmiley](https://forums.maslowcnc.com/u/mcmiley)\
**Post date:** [October 10, 2018, 2:48pm UTC](https://forums.maslowcnc.com/t/sketchup-phlatboyz-plugin-for-gcode/7215/1 "2018-10-10T14:48:30Z")

</div>

I have now made three projects using Sketchup and a plug-in created by Phlatboyz that enables the generation of Gcode, and a viewer that gives a 3D representation of the toolpathing. My first cuts were good and I produced a large logo stencil. I had a couple of mess-ups that were caused by ‘Sled not Keeping up’ issues and me not knowing how best to resolve the issue. But despite that I produced a quality stencil (pics will be posted when I have time). I’ve also produced a spiral bowl (yet to be finished with laquer) and a marble race sign. The plug-in can be found as Sketchucam, here: [https://openbuilds.com/projectresources/sketchucam.1/](https://openbuilds.com/projectresources/sketchucam.1/)  
I did have one problem during my second project whereby it just kept outputting junk code, and the resolve was to remove and reinstall the plug-in - Hey Presto, up and running again. The software was designed by Phlatboyz I believe, whose goal was to enable RC plane makers to CNC fuselage components. It’s worth investigating their cnc printers and taking a good look around the Openbuilds site if you haven’t already.  
Will get some project pics up as soon as poss…
