# Slack lower belts on vertical Maslow

**URL:** <https://forums.maslowcnc.com/t/slack-lower-belts-on-vertical-maslow/25188>\
**Category:** Uncategorized\
**Created:** [November 15, 2025, 7:48pm UTC](https://forums.maslowcnc.com/t/slack-lower-belts-on-vertical-maslow/25188 "2025-11-15T19:48:17Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [November 15, 2025, 9:14pm UTC](https://forums.maslowcnc.com/t/slack-lower-belts-on-vertical-maslow/25188/5 "2025-11-15T21:14:12Z")

</div>

Do you mean V1.2 or V1.12 (V1.14) is the latest. V1.13 has problems

If you go to Setup, Config what size is your configuration grid. You probably need to run Find Anchor points with a larger Grid. This may give you a lower fitness score, but the Maslow will have a better idea of where it is in relation to the anchors. It may also take longer to finish.

 ![Screenshot 2025-11-16 080531](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/f/b/fb16e43a607ad05ac3139a04bf917e3b001828bd.png)

---

_[View the full topic](https://forums.maslowcnc.com/t/slack-lower-belts-on-vertical-maslow/25188)._
