# Sled dimensioned drawing

**URL:** <https://forums.maslowcnc.com/t/sled-dimensioned-drawing/3688>\
**Category:** Sled\
**Created:** [May 1, 2018, 8:30pm UTC](https://forums.maslowcnc.com/t/sled-dimensioned-drawing/3688 "2018-05-01T20:30:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jose\_Miguel\_Giraldez](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jose_miguel_giraldez/32/21545_2.png) [@Jose\_Miguel\_Giraldez](https://forums.maslowcnc.com/u/Jose_Miguel_Giraldez)\
**Post date:** [May 1, 2018, 8:30pm UTC](https://forums.maslowcnc.com/t/sled-dimensioned-drawing/3688/1 "2018-05-01T20:30:30Z")

</div>

[https://github.com/MaslowCNC/Mechanics](https://github.com/MaslowCNC/Mechanics) does not have the sled dimensions

I am making a dimensioned drawing of the sled so I can create a 3D model of the sled. Could you please help me check this dimensions? (Units are inches)  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/bcf0fd7ae033e945c5ec5157fd7875ea55a6a1bf.jpg)  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/d/dfef3f91d790904ff72850b20dccb54984f318f6.jpg)  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/8/8dff133304c73bf291504a1756ac0a170ff1d9fd.jpg)

Also, in the github mechanics there is only this bracket, but not the ring bracket.

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/2/27d41693d4770a593ce00c0ff37f234b22107e7b.png)

Does anyone have the ring bracket design? the distance from the center to the three alignment holes is not the same for the three holes.

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/7/72990e8647028d71ca2ae107e889e9c38ce528f1.png)

If you help I promise sharing all my engineering drawings/models in the end.

---

<div class="post-metadata">

**Author:** ![Jose\_Miguel\_Giraldez](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jose_miguel_giraldez/32/21545_2.png) [@Jose\_Miguel\_Giraldez](https://forums.maslowcnc.com/u/Jose_Miguel_Giraldez)\
**Post date:** [May 1, 2018, 8:32pm UTC](https://forums.maslowcnc.com/t/sled-dimensioned-drawing/3688/2 "2018-05-01T20:32:48Z")

</div>

Nevermind, please ignore this post. I just found the files in the community garden.
