# Sled files for Rigid Router R22002
**URL:** https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928
**Category:** Hardware
**Created:** [March 26, 2018, 9:19pm UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928 "2018-03-26T21:19:18Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@kaizen33](https://forums.maslowcnc.com/u/kaizen33)
#### Post date: [March 26, 2018, 9:19pm UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/1 "2018-03-26T21:19:18Z")
Hello,
Don’t know if this is the right area to post this but here it goes. I finally was able to clean out my garage and make space for the maslow that I ordered last year. I went thru the assembly guide. Setup my electronics. Programmed the Arduino. Installed the latest ground control which i think will be updated soon as there seems to be an issue with the last step (Test Cut). Somehow a window is not showing up and freezing the process to make a test cut and measurement afterwards. I found that out thru a previous post. So I moved on and built the new frame made of 2x4. I’m finally at the final step which is cutting the final sled. Finally, here is why i made the post. Is there a another file that already have all the holes that are needed for the R22002? The new sled design seems to be made for the ring which is another item i do not have and doesn’t seem to have the holes to screw in the router on. I already purchased the z-axis machine which i’m waiting shipment on and the Triangulation Kit. Any help would greatly be appreciated. Thanks!
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [March 26, 2018, 9:27pm UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/2 "2018-03-26T21:27:54Z")
FWW - I hand drilled mine. I took the bottom section off and used it as a template to mark the holes.
We have files in the Community Garden.
[https://github.com/MaslowCNC/CommunityGarden/wiki/Community-Contributed-Files](https://github.com/MaslowCNC/CommunityGarden/wiki/Community-Contributed-Files)
There may have been some updated files as well.
Thank you
---
### Author:  [@kaizen33](https://forums.maslowcnc.com/u/kaizen33)
#### Post date: [March 27, 2018, 4:51am UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/3 "2018-03-27T04:51:29Z")
Thanks for the response! I will do that with my router base. I checked the files in the community garden and i’m not seeing the sled for the L brackets i got with my machine. Now i ordered mine a while ago and received my package last year but i wasn’t able to build it till now. I’ve seen post with the L brackets i have and i just can’t find the svg or dxf files with the holes for the L brackets. Probably outdated. Let me know if i’m just being blind lol.
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [March 27, 2018, 7:38am UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/4 "2018-03-27T07:38:06Z")
> **[MaslowCNC/Mechanics](https://github.com/MaslowCNC/Mechanics/wiki/Using-the-Temporary-Frame-to-Cut-Parts)**
>
> Digital Design Files. Contribute to MaslowCNC/Mechanics development by creating an account on GitHub.
step 6
Thank you
---
### Author:  [@bar](https://forums.maslowcnc.com/u/bar)
#### Post date: [March 27, 2018, 4:27pm UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/5 "2018-03-27T16:27:57Z")
I think the file you are looking for may have been replaced with the new version. I’ll track down the old one and get it posted
---
### Author:  [@bar](https://forums.maslowcnc.com/u/bar)
#### Post date: [March 27, 2018, 5:05pm UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/6 "2018-03-27T17:05:24Z")
The files are up! You can find them here:
[http://maslowcommunitygarden.org/Original-Maslow-Sled-Design.html](http://maslowcommunitygarden.org/Original-Maslow-Sled-Design.html)
---
### Author:  [@kaizen33](https://forums.maslowcnc.com/u/kaizen33)
#### Post date: [March 28, 2018, 12:08am UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/7 "2018-03-28T00:08:08Z")
There it is! Thank you very much!
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [March 28, 2018, 12:40am UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/8 "2018-03-28T00:40:52Z")
@bar
Can you restore the All files in step 6 from above - I for one have not completed the build and will need that file.
Thank you
---
### Author:  [@bar](https://forums.maslowcnc.com/u/bar)
#### Post date: [March 28, 2018, 12:43am UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/9 "2018-03-28T00:43:40Z")
Yes, absolutely 12345678
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [March 28, 2018, 12:47am UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/10 "2018-03-28T00:47:07Z")
Thank you \<3
based on this reply - it may be out of the realm - On occasion I want to reply with 1 word or 2. Is there a easy way we can add, a pad function, to add 01234567890,09876543210 to short replies. I get tired of counting. Sad I know.
---
### Author:  [@jwolter](https://forums.maslowcnc.com/u/jwolter)
#### Post date: [August 9, 2018, 10:40pm UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/11 "2018-08-09T22:40:54Z")
A while ago I learned that when you post an emoji using the colons (:), each character in the emoji name counts toward the minimum number of characters. It also turns out that there are a few emoji whose names are long enough to reach the minimum. stuck\_out\_tongue\_winking\_eye, for example.
---
### Author:  [@Gero](https://forums.maslowcnc.com/u/Gero)
#### Post date: [August 9, 2018, 11:27pm UTC](https://forums.maslowcnc.com/t/sled-files-for-rigid-router-r22002/2928/12 "2018-08-09T23:27:24Z")
💪