# Sled going off Spoil Board

**URL:** <https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388>\
**Category:** Troubleshooting\
**Created:** [March 27, 2024, 10:14pm UTC](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388 "2024-03-27T22:14:42Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 28, 2024, 2:48pm UTC](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388/21 "2024-03-28T14:48:53Z")

</div>

Don’t make any big changes, you are basically there!

---

<div class="post-metadata">

**Author:** ![steden](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/steden/32/23333_2.png) [@steden](https://forums.maslowcnc.com/u/steden)\
**Post date:** [March 28, 2024, 6:21pm UTC](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388/22 "2024-03-28T18:21:44Z")

</div>

Repeated Calibration…

Fitness: 0.5676801815422432 in 72900 cycles  
Fitness: 0.5676801815422432 in 73000 cycles  
Calibration complete

Now, I’m trying to print a simple “heart” for my daughter. I made a heart in TinkerCad and exported as SVG. I loaded into KrabzCAM to make a G-code of the outline.

In Maslow UI, I loaded G-code. Then it appeared in drop down menu below the “play/pause/stop.”

I’m assuming I just turn on router and hit PLAY?

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 28, 2024, 7:00pm UTC](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388/23 "2024-03-28T19:00:02Z")

</div>

EXCELLENT PROGRESS! 🎊 ❤ 👍 👍

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 28, 2024, 7:00pm UTC](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388/24 "2024-03-28T19:00:44Z")

</div>

The first thing that I would do before running the code is to jog around with the arrow buttons a bit to make sure that everything feels good. Once everything is feeling good you should be ready to press the play button 😀

---

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [March 28, 2024, 7:10pm UTC](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388/25 "2024-03-28T19:10:31Z")

</div>

That’s really useful video, thanks for posting.

---

<div class="post-metadata">

**Author:** ![steden](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/steden/32/23333_2.png) [@steden](https://forums.maslowcnc.com/u/steden)\
**Post date:** [March 28, 2024, 7:13pm UTC](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388/26 "2024-03-28T19:13:15Z")

</div>

Bar’s hands not mine. What a fun project!

[Previous page](https://forums.maslowcnc.com/t/sled-going-off-spoil-board/20388.md?page=1)