# Sled idea with router lift

**URL:** <https://forums.maslowcnc.com/t/sled-idea-with-router-lift/796>\
**Category:** Hardware\
**Created:** [October 7, 2017, 6:54pm UTC](https://forums.maslowcnc.com/t/sled-idea-with-router-lift/796 "2017-10-07T18:54:46Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![awlinc](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/awlinc/32/12132_2.png) [@awlinc](https://forums.maslowcnc.com/u/awlinc)\
**Post date:** [November 21, 2017, 10:47pm UTC](https://forums.maslowcnc.com/t/sled-idea-with-router-lift/796/9 "2017-11-21T22:47:10Z")

</div>

Not sure how far you’ve gotten on this build, but you might want take a look at this. If you’ve made the rings, you’re halfway there… I haven’t built and tested yet, I’m still gathering parts and thoughts.

> [@Chain & Sprocket Triangular Kinematics](https://forums.maslowcnc.com/t/chain-sprocket-triangular-kinematics/1089):
>
> Continuing the discussion from [Throwing my hat in the sled modification ring](https://forums.maslowcnc.com/t/throwing-my-hat-in-the-sled-modification-ring/193/669): I’m, splitting this idea from @awlinc out of the massive ring sled discussion, because it’s my new favorite and I think it’s very promising. A lot of the other triangular kinematics designs require custom hardware like those offered by @bar (laser cut steel ring & v-groove bearings upcoming), @dlang (steel top ‘pantograph’), and @pillageTHENburn (laser cut birch 45 degree ‘pantograph’). All of these solutions look a…

---

_[View the full topic](https://forums.maslowcnc.com/t/sled-idea-with-router-lift/796)._