# Sled ring bearings

**URL:** <https://forums.maslowcnc.com/t/sled-ring-bearings/15773>\
**Category:** Troubleshooting\
**Created:** [January 12, 2021, 1:17am UTC](https://forums.maslowcnc.com/t/sled-ring-bearings/15773 "2021-01-12T01:17:02Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![DBGWoody](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dbgwoody/32/19243_2.png) [@DBGWoody](https://forums.maslowcnc.com/u/DBGWoody)\
**Post date:** [January 12, 2021, 1:17am UTC](https://forums.maslowcnc.com/t/sled-ring-bearings/15773/1 "2021-01-12T01:17:02Z")

</div>

I need 2 sled ring bearings and I cannot seem to find a usable link to buy them. Anyone know of a source for these?

Thanks!

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [January 13, 2021, 5:33pm UTC](https://forums.maslowcnc.com/t/sled-ring-bearings/15773/2 "2021-01-13T17:33:41Z")

</div>

Those are tricky to find. I haven’t seen them publicly available in small quantities.

Have you tried messaging the folks selling kits? I bet one of them would be willing to sell you some.

---

<div class="post-metadata">

**Author:** ![Wubster](https://avatars.discourse-cdn.com/v4/letter/w/ecae2f/32.png) [@Wubster](https://forums.maslowcnc.com/u/Wubster)\
**Post date:** [January 14, 2021, 5:40pm UTC](https://forums.maslowcnc.com/t/sled-ring-bearings/15773/3 "2021-01-14T17:40:15Z")

</div>

I upgraded to a Metal Maslow so have an entire ring system I would send you if you paid shipping.

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [January 14, 2021, 6:52pm UTC](https://forums.maslowcnc.com/t/sled-ring-bearings/15773/4 "2021-01-14T18:52:53Z")

</div>

Did you go to the linkage setup?

---

<div class="post-metadata">

**Author:** ![DBGWoody](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dbgwoody/32/19243_2.png) [@DBGWoody](https://forums.maslowcnc.com/u/DBGWoody)\
**Post date:** [January 20, 2021, 9:03pm UTC](https://forums.maslowcnc.com/t/sled-ring-bearings/15773/5 "2021-01-20T21:03:08Z")

</div>

Nobody answered for the kits. Wubster I live in V.A. where are you located? I tried to buy the linkage setup however, they are sold out, I have a laser cutter and can make my own if I can find the plans.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [January 21, 2021, 5:17pm UTC](https://forums.maslowcnc.com/t/sled-ring-bearings/15773/6 "2021-01-21T17:17:02Z")

</div>

This isn’t exactly what you are looking for, but it might help:

[http://maslowcommunitygarden.org/3D-Printed-Linkage.html](http://maslowcommunitygarden.org/3D-Printed-Linkage.html)