# Slim Chair from Opendesk

**URL:** <https://forums.maslowcnc.com/t/slim-chair-from-opendesk/3237>\
**Category:** Projects\
**Created:** [April 9, 2018, 9:34pm UTC](https://forums.maslowcnc.com/t/slim-chair-from-opendesk/3237 "2018-04-09T21:34:25Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![MdO](https://avatars.discourse-cdn.com/v4/letter/m/f17d59/32.png) [@MdO](https://forums.maslowcnc.com/u/MdO)\
**Post date:** [December 26, 2018, 8:14am UTC](https://forums.maslowcnc.com/t/slim-chair-from-opendesk/3237/13 "2018-12-26T08:14:57Z")

</div>

![Foto%2024-12-18%2014%2014%2007](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/8/8b68d29ca7f20896fd641dacec6cae772ad3d19b.jpeg) ![Foto%2024-12-18%2020%2055%2016](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/6/608cc5b4c347672ef9c6f38f0a846ebd8423a250.jpeg)

I also scaled the chair for my kids (with Fusion) and set the thickness of the plywood back to 18mm. Noticed that the pockets were not wide enough, so I ran the G-code again with a 8mm bit instead of a 6mm. Then it fitted like a glove.  
The famous “sled not keeping up” notification popped up half way during the cut. In my case a dull router bit was the root cause.

---

_[View the full topic](https://forums.maslowcnc.com/t/slim-chair-from-opendesk/3237)._