# So I want to calibrate my Maslow

**URL:** <https://forums.maslowcnc.com/t/so-i-want-to-calibrate-my-maslow/7602>\
**Category:** No Judgement\
**Tags:** calibration\
**Created:** [November 6, 2018, 1:09pm UTC](https://forums.maslowcnc.com/t/so-i-want-to-calibrate-my-maslow/7602 "2018-11-06T13:09:29Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![TalleyMakeWork](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/talleymakework/32/2442_2.png) [@TalleyMakeWork](https://forums.maslowcnc.com/u/TalleyMakeWork)\
**Post date:** [November 11, 2018, 9:48pm UTC](https://forums.maslowcnc.com/t/so-i-want-to-calibrate-my-maslow/7602/8 "2018-11-11T21:48:58Z")

</div>

So I finally have a bit of sanity following this thread.

> [@Corrupted firmware/groundcontrol using different versions weird G2/G3 cuts](https://forums.maslowcnc.com/t/corrupted-firmware-groundcontrol-using-different-versions-weird-g2-g3-cuts/7527/9):
>
> We’re on a monthly update cycle, so the next official release will be December 1. Until then, here is a zip file containing a corrected version of Firmware-v1.24: [Firmware-v1.24-Issue-476-G2-gcode-error-corrected.zip](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/a/ae48f58e66724216fd0110cfce2379103867b4ea.zip) (84.9 KB)

This fixed the poorly cut contour of my original .nc file. Now I need to recalibrate…again.

---

_[View the full topic](https://forums.maslowcnc.com/t/so-i-want-to-calibrate-my-maslow/7602)._