# \[SOLVED\] Calibration lines not straight

**URL:** <https://forums.maslowcnc.com/t/solved-calibration-lines-not-straight/3256>\
**Category:** Troubleshooting\
**Created:** [April 10, 2018, 7:46pm UTC](https://forums.maslowcnc.com/t/solved-calibration-lines-not-straight/3256 "2018-04-10T19:46:14Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [April 10, 2018, 10:19pm UTC](https://forums.maslowcnc.com/t/solved-calibration-lines-not-straight/3256/10 "2018-04-10T22:19:10Z")

</div>

Does this topic seem related?

> [@Z-Axis Bungee To Ensure Correct Depth](https://forums.maslowcnc.com/t/z-axis-bungee-to-ensure-correct-depth/481):
>
> I was noticing that the router was not always plunging to the depth it should when the Z-Axis moved. When I would push on the top of the router it would drop to the correct level, and getting that bolt on the plunge lock at the exact tightness was a pain. I added some small bungees around the handles, and over the top of the router and the tension pushing towards the work surface is enough to ensure the router plunges at the given depth. Photo:

---

_[View the full topic](https://forums.maslowcnc.com/t/solved-calibration-lines-not-straight/3256)._
