# Sorcerer Mickey

**URL:** <https://forums.maslowcnc.com/t/sorcerer-mickey/3349>\
**Category:** Projects\
**Created:** [April 14, 2018, 1:53am UTC](https://forums.maslowcnc.com/t/sorcerer-mickey/3349 "2018-04-14T01:53:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sharpsburg\_Woodworke](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/sharpsburg_woodworke/32/3794_2.png) [@Sharpsburg\_Woodworke](https://forums.maslowcnc.com/u/Sharpsburg_Woodworke)\
**Post date:** [April 14, 2018, 1:53am UTC](https://forums.maslowcnc.com/t/sorcerer-mickey/3349/1 "2018-04-14T01:53:58Z")

</div>

Sorcerer Mickey cut out with a temporary sled. I need help with tabs. I drew them out on maker cam but they were never cut out on the wood. I brad nailed Mickey to the backer board to hold it in place. Also the battery died on the last pass. I used a jig saw to finish it off and a side grinder to clean up the edges. I plan to paint it all black.

 ![IMG_20180413_203731](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/1/167d7b952ee840d59463efcc0aaa4fd23b7107e4.jpg) ![IMG_20180413_211714](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/3/32dff7f87a66533d3e3056026915ab7f9c0c1916.jpg) ![IMG_20180413_213226](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/0/0ce82bb984f0d66c1490ea471920f7520505f365.jpg)

---

<div class="post-metadata">

**Author:** ![Stephen\_Slagle](https://avatars.discourse-cdn.com/v4/letter/s/df705f/32.png) [@Stephen\_Slagle](https://forums.maslowcnc.com/u/Stephen_Slagle)\
**Post date:** [April 14, 2018, 3:23am UTC](https://forums.maslowcnc.com/t/sorcerer-mickey/3349/2 "2018-04-14T03:23:02Z")

</div>

I say, “Nicely Done!”

---

<div class="post-metadata">

**Author:** ![Maslonians207](https://avatars.discourse-cdn.com/v4/letter/m/b782af/32.png) [@Maslonians207](https://forums.maslowcnc.com/u/Maslonians207)\
**Post date:** [April 14, 2018, 2:44pm UTC](https://forums.maslowcnc.com/t/sorcerer-mickey/3349/3 "2018-04-14T14:44:22Z")

</div>

That is cool! Have you thought about repeating the cut on a different type of wood, and making one or both a two-tone inlay?

Also, what type of wood or stain did you use? I like the color!

---

<div class="post-metadata">

**Author:** ![Sharpsburg\_Woodworke](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/sharpsburg_woodworke/32/3794_2.png) [@Sharpsburg\_Woodworke](https://forums.maslowcnc.com/u/Sharpsburg_Woodworke)\
**Post date:** [April 14, 2018, 5:40pm UTC](https://forums.maslowcnc.com/t/sorcerer-mickey/3349/4 "2018-04-14T17:40:58Z")

</div>

That was just the wood in the picture. It was scrap wood that I’m learning on. My kids painted it as just a silhouette. Here is the finished product.

 ![IMG_20180414_132811](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/4/42f65ca31bc2f03833a0997a793c6c3b85dbe43d.jpg)