# Speedy setup for 2" rigid foamboard?

**URL:** https://forums.maslowcnc.com/t/speedy-setup-for-2-rigid-foamboard/25236
**Category:** No Judgement
**Created:** [November 27, 2025, 7:37pm UTC](https://forums.maslowcnc.com/t/speedy-setup-for-2-rigid-foamboard/25236 "2025-11-27T19:37:41Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![wouldchuck](https://avatars.discourse-cdn.com/v4/letter/w/58956e/32.png) [@wouldchuck](https://forums.maslowcnc.com/u/wouldchuck)
#### Post date: [November 27, 2025, 10:18pm UTC](https://forums.maslowcnc.com/t/speedy-setup-for-2-rigid-foamboard/25236/2 "2025-11-27T22:18:37Z")

</div>

I have not tried but maybe a 1/4 in drill bit?  
Or maybe a rotozip bit? [WD1 Cutting & Carving Bits](https://www.rotozip.com/us/en/p/wd1-2610016653)

I would want a good vacuum system

Has anyone done this?

> [@Cutting foam and/or foamcore for box inserts. Has anyone done this before with the Maslow?](https://forums.maslowcnc.com/t/cutting-foam-and-or-foamcore-for-box-inserts-has-anyone-done-this-before-with-the-maslow/1965):
>
> Has anyone tried cutting Foam or Foamcore with their maslow routers? I was looking to make box inserts for boardgames or to router foam for tool/other inserts. You know how when you buy some tools and they come in a box with a foam insert that fits exactly to their shape? I am eagerly awaiting my Maslow in the mail (late February) but i am trying to collect ideas for my first projects. Any help or advice would be appreciated slight_smile

> [@Foam sign with lighting](https://forums.maslowcnc.com/t/foam-sign-with-lighting/11310):
>
> 2" foam back with layered 1" foam letters

---

_[View the full topic](https://forums.maslowcnc.com/t/speedy-setup-for-2-rigid-foamboard/25236)._