# Spindle on (M3-4) no signal on D17 with shield v1.4b

**URL:** <https://forums.maslowcnc.com/t/spindle-on-m3-4-no-signal-on-d17-with-shield-v1-4b/10478>\
**Category:** Troubleshooting\
**Created:** [July 11, 2019, 3:07pm UTC](https://forums.maslowcnc.com/t/spindle-on-m3-4-no-signal-on-d17-with-shield-v1-4b/10478 "2019-07-11T15:07:50Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\
**Post date:** [July 12, 2019, 4:52am UTC](https://forums.maslowcnc.com/t/spindle-on-m3-4-no-signal-on-d17-with-shield-v1-4b/10478/14 "2019-07-12T04:52:36Z")

</div>

I will add here a note. Each and every connection you make with anything conductive can introduce RF noise or EMI and make something that worked without problems act erratic. This is basic electronics and not specific to the Maslow in any way.

There is no easy test to “see” this or know what environment will have the issue. There are a number of factors including humidity and grounding.

Thank you

As documented here:

> [@USB disconnection issue: solved(?)](https://forums.maslowcnc.com/t/usb-disconnection-issue-solved/10480/1):
>
> In a prior post, I had mentioned that I had communication issues between the PC and Arduino which I attributed to RF noise. @WoodCutter4 asked if I would add a topic to document my effort. It was about a couple of months ago that I fixed the issue, so I’m not 100% certain I recall all the details but here’s a summary of what I encountered and my solutions. I had 2 basic issues. While running a part, the CNC would err in 1 of two ways. (sorry I don’t recall the exact message) 1 The cnc would s…

---

_[View the full topic](https://forums.maslowcnc.com/t/spindle-on-m3-4-no-signal-on-d17-with-shield-v1-4b/10478)._
