# Spoilboard grid

**URL:** <https://forums.maslowcnc.com/t/spoilboard-grid/21270>\
**Category:** Projects\
**Created:** [May 29, 2024, 1:39am UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270 "2024-05-29T01:39:21Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![bthalanski](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bthalanski/32/23715_2.png) [@bthalanski](https://forums.maslowcnc.com/u/bthalanski)\
**Post date:** [May 29, 2024, 1:39am UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270/1 "2024-05-29T01:39:21Z")

</div>

Finally got my encoders all working (was having trouble with them pushing instead of pulling during extend all.

Setting up for some repeat work carving 8 shields for a viking themed event. The left side 36 is rough but the verticle lines out to 44" are straight as an arrow. Looking forward to the next cut!

 ![20240528_204405](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/d/e/de2893021f9267af72f30c76c4d628ae85e2e778.jpeg)

 ![20240528_212027](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/0/a/0acf3ea7b0ca5a9bbde2e52b8ba6e05d6a0a372b.jpeg)

---

<div class="post-metadata">

**Author:** ![gazinux](https://avatars.discourse-cdn.com/v4/letter/g/dec6dc/32.png) [@gazinux](https://forums.maslowcnc.com/u/gazinux)\
**Post date:** [May 29, 2024, 3:03am UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270/2 "2024-05-29T03:03:01Z")

</div>

Looks good! What do you think fixed your push to extend issue?

---

<div class="post-metadata">

**Author:** ![bthalanski](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bthalanski/32/23715_2.png) [@bthalanski](https://forums.maslowcnc.com/u/bthalanski)\
**Post date:** [May 29, 2024, 10:48am UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270/3 "2024-05-29T10:48:29Z")

</div>

Not sure. The day before all four belts were locked up in push to extend, today it was just top right. I extended the belt out by pushing it and then retracted all the belts again. Tje next time I extrnded all top right was working normally.

I think Bar is close to an answer with the floating encoder pin. I just haven’t brought myself to wanting to tear the arms down again to attach the jumper wired to ground.

---

<div class="post-metadata">

**Author:** ![smarcus3](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/smarcus3/32/26517_2.png) [@smarcus3](https://forums.maslowcnc.com/u/smarcus3)\
**Post date:** [May 30, 2024, 1:24pm UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270/4 "2024-05-30T13:24:00Z")

</div>

This is a great idea to aid in alignment.

---

<div class="post-metadata">

**Author:** ![paullenhardt](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/paullenhardt/32/23328_2.png) [@paullenhardt](https://forums.maslowcnc.com/u/paullenhardt)\
**Post date:** [May 31, 2024, 6:03am UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270/5 "2024-05-31T06:03:04Z")

</div>

I love this idea! Would you be able to share the design or g-code or anything?

---

<div class="post-metadata">

**Author:** ![bthalanski](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bthalanski/32/23715_2.png) [@bthalanski](https://forums.maslowcnc.com/u/bthalanski)\
**Post date:** [June 3, 2024, 12:47pm UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270/6 "2024-06-03T12:47:18Z")

</div>

Sorry, just got back home. I will work on getting the g-code uploaded today.

[Spoil Board.nc](https://forums.maslowcnc.com/uploads/short-url/4EbFuGBqy7WuQQj66QaYIWVjiep.nc) (89.5 KB)

---

<div class="post-metadata">

**Author:** ![boxomatic](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/boxomatic/32/23939_2.png) [@boxomatic](https://forums.maslowcnc.com/u/boxomatic)\
**Post date:** [June 4, 2024, 7:14am UTC](https://forums.maslowcnc.com/t/spoilboard-grid/21270/7 "2024-06-04T07:14:03Z")

</div>

This looks cool, I want to try it!@