# Standalone Calibration Simulator

**URL:** <https://forums.maslowcnc.com/t/standalone-calibration-simulator/20649>\
**Category:** Software\
**Created:** [April 13, 2024, 5:58pm UTC](https://forums.maslowcnc.com/t/standalone-calibration-simulator/20649 "2024-04-13T17:58:11Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Ethan](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/ethan/32/23558_2.png) [@Ethan](https://forums.maslowcnc.com/u/Ethan)\
**Post date:** [April 13, 2024, 5:58pm UTC](https://forums.maslowcnc.com/t/standalone-calibration-simulator/20649/1 "2024-04-13T17:58:11Z")

</div>

@ronlawrence3 had an idea to make a standalone site that simulates calibration (similar to his [calibration tab](https://github.com/ronlawrence3/ESP3D-WEBUI/releases/tag/v0.0.1-calibration)), so I went ahead and worked on making one! You can put in the CLBM line from your logs (or an edited version of your own) to run the calibration again.

Behold:  
[Maslow 4 Standalone Calibration Simulator  
  ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/b/b/bb7f78cb78a5e998d240af25c3f3c5f3e03121e4.jpeg)](https://m4cal.etskinner.com/)

Repository is here: [GitHub - etskinner/Maslow4-Standalone-Calibration: A standalone site to simulate calibration on Maslow 4](https://github.com/etskinner/Maslow4-Standalone-Calibration)

---

_[View the full topic](https://forums.maslowcnc.com/t/standalone-calibration-simulator/20649)._