# Starting over after long layoff

**URL:** <https://forums.maslowcnc.com/t/starting-over-after-long-layoff/18952>\
**Category:** No Judgement\
**Created:** [July 2, 2023, 2:54pm UTC](https://forums.maslowcnc.com/t/starting-over-after-long-layoff/18952 "2023-07-02T14:54:29Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [July 4, 2023, 3:42am UTC](https://forums.maslowcnc.com/t/starting-over-after-long-layoff/18952/2 "2023-07-04T03:42:53Z")

</div>

The wiki posts [here](https://forums.maslowcnc.com/t/coreldraw-carbide-create-basic-workflow-png-gcode/15006) and [here](https://forums.maslowcnc.com/t/inkscape-esltcam-basic-workflow-jpg-gcode/14886) show a couple examples of SVG to gcode. There are other options as well, but these are 2 step by step instructionals I wrote. Perhaps they might be helpful.

---

_[View the full topic](https://forums.maslowcnc.com/t/starting-over-after-long-layoff/18952)._