# Step by Step guide to creating GCode for the Maslow with FreeCAD

**URL:** <https://forums.maslowcnc.com/t/step-by-step-guide-to-creating-gcode-for-the-maslow-with-freecad/5279>\
**Category:** FreeCAD\
**Created:** [July 30, 2018, 6:13am UTC](https://forums.maslowcnc.com/t/step-by-step-guide-to-creating-gcode-for-the-maslow-with-freecad/5279 "2018-07-30T06:13:05Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Walt\_Moorhouse](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/walt_moorhouse/32/7512_2.png) [@Walt\_Moorhouse](https://forums.maslowcnc.com/u/Walt_Moorhouse)\
**Post date:** [July 30, 2018, 7:31am UTC](https://forums.maslowcnc.com/t/step-by-step-guide-to-creating-gcode-for-the-maslow-with-freecad/5279/2 "2018-07-30T07:31:21Z")

</div>

I’ve also created a maslow\_post.py for FreeCAD. It doesn’t do anything special, except it removes all unsupported codes and I updated the Pre and Postamble. Also, it says Maslow in the GCode now. If there are any suggestions for improvements, please let me know.

[maslow\_post.py](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/1/1608d9fd9edf5963ea22ed2bde0d56c376b4b235.py) (10.8 KB)

---

_[View the full topic](https://forums.maslowcnc.com/t/step-by-step-guide-to-creating-gcode-for-the-maslow-with-freecad/5279)._