# Sticky thread for latest GC and Firmware **URL:** \ **Category:** Ground Control\ **Created:** [September 13, 2018, 3:51pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685 "2018-09-13T15:51:58Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![xrok1](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/xrok1/32/19640_2.png) [@xrok1](https://forums.maslowcnc.com/u/xrok1)\ **Post date:** [September 13, 2018, 3:51pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/1 "2018-09-13T15:51:58Z")
Can we add this? I’d like to be able to see at a glance of the forums when new versions are released with a change log. ---
**Author:** ![blurfl](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blurfl/32/9_2.png) [@blurfl](https://forums.maslowcnc.com/u/blurfl)\ **Post date:** [September 13, 2018, 4:01pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/2 "2018-09-13T16:01:44Z")
These links will always point to the latest release, which has the change list: GroundControl [latest release](https://github.com/MaslowCNC/GroundControl/releases/latest) Firmware [latest release](https://github.com/MaslowCNC/Firmware/releases/latest) Otherwise, someone will need to maintain the list here if it is to be separate but up to date. ---
**Author:** ![xrok1](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/xrok1/32/19640_2.png) [@xrok1](https://forums.maslowcnc.com/u/xrok1)\ **Post date:** [September 13, 2018, 4:08pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/3 "2018-09-13T16:08:47Z")
Where can we quick access these links? besides here! lol ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [September 13, 2018, 4:26pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/4 "2018-09-13T16:26:47Z")
As far as I’ve seen we can pin posts, but do they stay on top? I the categories perhaps in the ‘about’. Another option is in the wiki. For me it’s bookmarks in the browser for now. ---
**Author:** ![Dustcloud](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dustcloud/32/1786_2.png) [@Dustcloud](https://forums.maslowcnc.com/u/Dustcloud)\ **Post date:** [September 13, 2018, 5:40pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/5 "2018-09-13T17:40:56Z")
Another option is to go to the Maslow website, then to the build instructions, and on to the firmware and Ground Control instrux… those links seem to always be up-to-date. ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [September 13, 2018, 6:06pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/6 "2018-09-13T18:06:03Z")
The links under the “Maslow” tab in the [Community Garden](http://maslowcommunitygarden.org/index.html) will always take you to the latest also ---
**Author:** ![xrok1](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/xrok1/32/19640_2.png) [@xrok1](https://forums.maslowcnc.com/u/xrok1)\ **Post date:** [September 13, 2018, 6:09pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/7 "2018-09-13T18:09:05Z")
Thank you ---
**Author:** ![Addubb](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/addubb/32/3089_2.png) [@Addubb](https://forums.maslowcnc.com/u/Addubb)\ **Post date:** [October 3, 2018, 7:14pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/8 "2018-10-03T19:14:59Z")
I am getting an error message when opening Groundcontrol 1.22 with firmware version 1.23 that GC is not compatible with this firmware. Should I / Can I reinstall firmware v. 1.22? ---
**Author:** ![blurfl](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blurfl/32/9_2.png) [@blurfl](https://forums.maslowcnc.com/u/blurfl)\ **Post date:** [October 3, 2018, 7:18pm UTC](https://forums.maslowcnc.com/t/sticky-thread-for-latest-gc-and-firmware/6685/9 "2018-10-03T19:18:30Z")
GC compares version numbers and alerts you if they are different. It’s usually OK to ignore the alert, as it is in this case too.