# Stock Z-Axis Motor

**URL:** <https://forums.maslowcnc.com/t/stock-z-axis-motor/1796>\
**Category:** Hardware\
**Created:** [January 7, 2018, 8:05pm UTC](https://forums.maslowcnc.com/t/stock-z-axis-motor/1796 "2018-01-07T20:05:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dexter\_Dixon](https://avatars.discourse-cdn.com/v4/letter/d/d78d45/32.png) [@Dexter\_Dixon](https://forums.maslowcnc.com/u/Dexter_Dixon)\
**Post date:** [January 7, 2018, 8:05pm UTC](https://forums.maslowcnc.com/t/stock-z-axis-motor/1796/1 "2018-01-07T20:05:17Z")

</div>

Hi, could anyone tell me the specs of the stock motors in the Z-Axis Kit? The link on the Z-Axis page brings me to a page that says 'Product is no longer available". Also, does anyone know where I could get a compatible wire connector for the stock Z- Axis motor?

Thanks you in advance!  
Dexter

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [January 8, 2018, 7:15pm UTC](https://forums.maslowcnc.com/t/stock-z-axis-motor/1796/2 "2018-01-08T19:15:10Z")

</div>

A copy of the data sheet is here:

[https://github.com/MaslowCNC/Electronics/blob/master/Documentation/Data%20Sheets/ET-SGM37FE-1222(20170810003-H16035)%20Model%20(1).pdf](https://github.com/MaslowCNC/Electronics/blob/master/Documentation/Data%20Sheets/ET-SGM37FE-1222(20170810003-H16035)%20Model%20(1).pdf)

which might help. If you find a similar motor with a different connector on the motor side it will work, you will just need to make a cable to connect to the Arduino Shield. On the Arduino Shield side the connector is a JST XH connector.

---

<div class="post-metadata">

**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\
**Post date:** [January 8, 2018, 7:28pm UTC](https://forums.maslowcnc.com/t/stock-z-axis-motor/1796/3 "2018-01-08T19:28:41Z")

</div>

added to the wiki -

Here :

> **[MaslowCNC/Mechanics](https://github.com/MaslowCNC/Mechanics/wiki/Resources-for-building-your-own-MaslowCNC)**
>
> Digital Design Files. Contribute to MaslowCNC/Mechanics development by creating an account on GitHub.

Thank you