# Tabletop Arcade **URL:** \ **Category:** Maslow Community\ **Created:** [June 11, 2018, 8:25pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328 "2018-06-11T20:25:49Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![GardenRobot](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gardenrobot/32/8571_2.png) [@GardenRobot](https://forums.maslowcnc.com/u/GardenRobot)\ **Post date:** [June 11, 2018, 8:25pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/1 "2018-06-11T20:25:49Z")
* * * This is a companion discussion topic for the original entry at [http://maslowcommunitygarden.org/Tabletop-Arcade.html](http://maslowcommunitygarden.org/Tabletop-Arcade.html) ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [June 11, 2018, 10:44pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/2 "2018-06-11T22:44:33Z")
This is a beautiful contribution to the community. The complete instructions are wonderful! 👍👍 Great work! ---
**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\ **Post date:** [June 13, 2018, 1:39am UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/3 "2018-06-13T01:39:07Z")
![](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/8/8317a7c67a35cea438c0abd8881258354b089692.jpg) ---
**Author:** ![xrok1](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/xrok1/32/19640_2.png) [@xrok1](https://forums.maslowcnc.com/u/xrok1)\ **Post date:** [June 13, 2018, 4:46pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/4 "2018-06-13T16:46:04Z")
on a side note the show full post buttons aren’t working. ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [June 13, 2018, 5:02pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/5 "2018-06-13T17:02:29Z")
Thanks for pointing that out, I’d never noticed that button before. I will look into it 👍 ---
**Author:** ![Scooter](https://avatars.discourse-cdn.com/v4/letter/s/b5a626/32.png) [@Scooter](https://forums.maslowcnc.com/u/Scooter)\ **Post date:** [June 13, 2018, 8:31pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/6 "2018-06-13T20:31:25Z")
Been lurking/watching this project for a while, hope for it to be one of the first ones I try when I get my Maslow. 🙂 Thanks for posting it! ---
**Author:** ![Brendon](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Brendon](https://forums.maslowcnc.com/u/Brendon)\ **Post date:** [August 1, 2018, 9:16pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/7 "2018-08-01T21:16:48Z")
Nice design, Very nearly completed my first build. I added pockets and glued everything together, and cut out of 5/8th mdf. Also managed to squeeze the whole cut into a 4 x 4 sheet, so got the material cost down to like 18 bucks CAD. Had a little mistake with the controls so had to cut that part again out of scrap ply. Thought you might enjoy some pics of your design! Spray painted with blue and red Rustoleum, couple hours wiring and T-Moulding to finish and it should be complete! ![55](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/4/451856cb40cf4e93353ccbd50f450a8df758e975.jpg) ![35](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/6/636cd597e4b84193c0dea84450c7418ffbaa872a.jpg) ![52](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/5/58a22d9a7598d9f349f6b80959757ed83ed10973.jpg) ![52](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/8/83d4fb8544d5a60a790dba39b7878557e97896b4.jpeg) ---
**Author:** ![KingOfScolboa](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/kingofscolboa/32/2438_2.png) [@KingOfScolboa](https://forums.maslowcnc.com/u/KingOfScolboa)\ **Post date:** [August 2, 2018, 3:57pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/8 "2018-08-02T15:57:25Z")
Looking good. Great to see in being reproduced and improved on. Pockets do seem like the better method than my L-brackets. Incidentally, my nephew has just obliterated my Galaga high score 😢 He’s not allowed near it any more. ---
**Author:** ![Creative\_Customs](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/creative_customs/32/10756_2.png) [@Creative\_Customs](https://forums.maslowcnc.com/u/Creative_Customs)\ **Post date:** [September 10, 2018, 5:36am UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/9 "2018-09-10T05:36:07Z")
[https://www.kregtool.com/store/c13/kreg-jigsreg/p35/kreg-jigreg-k4-master-system/](https://www.kregtool.com/store/c13/kreg-jigsreg/p35/kreg-jigreg-k4-master-system/) You should look into Kreg tools and the jigs they offer. They are strongest ways to join wood panels when you want to hide the screws, they also offer plugs to hide the holes from view on the inside as well. These are pretty much the industry standard when it comes to furniture makers. ![s-l1700%2024](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/e/e1b203dfee80f42a14fa13542d914df0770cef71.jpeg) ---
**Author:** ![Creative\_Customs](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/creative_customs/32/10756_2.png) [@Creative\_Customs](https://forums.maslowcnc.com/u/Creative_Customs)\ **Post date:** [September 10, 2018, 5:36am UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/10 "2018-09-10T05:36:51Z")
![s-l1700%2023](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/c/cce43371ebc7905de3be0e5528e759f5c2aeddc5.jpeg) ---
**Author:** ![Brad\_MacAleese](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/brad_macaleese/32/13354_2.png) [@Brad\_MacAleese](https://forums.maslowcnc.com/u/Brad_MacAleese)\ **Post date:** [June 15, 2019, 7:31pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/11 "2019-06-15T19:31:27Z")
Can I possibly get your file where you have it all slotted and designed to fit together?? ---
**Author:** ![fernando.gc](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/fernando.gc/32/13262_2.png) [@fernando.gc](https://forums.maslowcnc.com/u/fernando.gc)\ **Post date:** [June 25, 2019, 4:40pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/12 "2019-06-25T16:40:25Z")
Hello everyone! It looks awesome! Is there any guide to see where I should put the parts together? It seems that you are leaving some spaces here and there, and since it is a build with curves and angles, everything should be where it is meant to (I think 😅) Is it for 19"-20" monitors? What’s the thickness of the wood? Thanks! ---
**Author:** ![Brendon](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Brendon](https://forums.maslowcnc.com/u/Brendon)\ **Post date:** [June 26, 2019, 5:13am UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/13 "2019-06-26T05:13:52Z")
Sorry busy time new job. I’ll find the file and send it hopefully tomorrow ---
**Author:** ![KingOfScolboa](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/kingofscolboa/32/2438_2.png) [@KingOfScolboa](https://forums.maslowcnc.com/u/KingOfScolboa)\ **Post date:** [June 26, 2019, 10:10am UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/14 "2019-06-26T10:10:53Z")
Hi, my version, the one in the community garden, was for a 20" monitor and I used 18mm thick ply but I think you could easily use a different thickness. I would recommend trying to make it weigh less if you plan to move it around much. I mostly just put the parts together until it looked correct and there weren’t any spaces between panels. Sorry that’s not very helpful. If i did it a second time i would include pockets as others are suggesting or at least a reference line of some sort. ---
**Author:** ![Brendon](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Brendon](https://forums.maslowcnc.com/u/Brendon)\ **Post date:** [June 26, 2019, 12:55pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/15 "2019-06-26T12:55:44Z")
Here is a zip with my last files i used to do the cuts and slots. I had a little issues with mine i think from a poorly calibrated maslow, but its much better now. Hope this helps! [Bartop Slotted.zip](https://forums.maslowcnc.com/uploads/short-url/olhjtaIdcM5qEayLuAQB0L66trQ.zip) (457.4 KB) ---
**Author:** ![fernando.gc](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/fernando.gc/32/13262_2.png) [@fernando.gc](https://forums.maslowcnc.com/u/fernando.gc)\ **Post date:** [July 1, 2019, 6:14pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/16 "2019-07-01T18:14:30Z")
How thick should the wood be? 18mm (3/4 inch)? Thanks for the files! ---
**Author:** ![Brendon](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Brendon](https://forums.maslowcnc.com/u/Brendon)\ **Post date:** [July 4, 2019, 9:37pm UTC](https://forums.maslowcnc.com/t/tabletop-arcade/4328/17 "2019-07-04T21:37:52Z")
As I recall it was 5/8 inch MDF i used and made the files for.