# Tensioning system to improve performance in bottom corners

**URL:** <https://forums.maslowcnc.com/t/tensioning-system-to-improve-performance-in-bottom-corners/4256>\
**Category:** Hardware\
**Tags:** chain, tension\
**Created:** [June 6, 2018, 12:38pm UTC](https://forums.maslowcnc.com/t/tensioning-system-to-improve-performance-in-bottom-corners/4256 "2018-06-06T12:38:36Z")\
**Posts on this page:** 1\
**Showing post:** 157

<div class="post-metadata">

**Author:** ![blurfl](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blurfl/32/9_2.png) [@blurfl](https://forums.maslowcnc.com/u/blurfl)\
**Post date:** [August 7, 2018, 9:35pm UTC](https://forums.maslowcnc.com/t/tensioning-system-to-improve-performance-in-bottom-corners/4256/157 "2018-08-07T21:35:25Z")

</div>

> [@eppic](#):
>
> There is a pin that could be monitored on the stock board for sled location

I think that the [Z-height-display](https://forums.maslowcnc.com/t/z-height-display/5408) gets the z axis location from that same data source…

---

_[View the full topic](https://forums.maslowcnc.com/t/tensioning-system-to-improve-performance-in-bottom-corners/4256)._