# Testing needed automatic calibration grid generation

**URL:** <https://forums.maslowcnc.com/t/testing-needed-automatic-calibration-grid-generation/24975>\
**Category:** Uncategorized\
**Created:** [October 1, 2025, 11:36pm UTC](https://forums.maslowcnc.com/t/testing-needed-automatic-calibration-grid-generation/24975 "2025-10-01T23:36:20Z")\
**Posts on this page:** 1\
**Showing post:** 116

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [October 11, 2025, 9:20pm UTC](https://forums.maslowcnc.com/t/testing-needed-automatic-calibration-grid-generation/24975/116 "2025-10-11T21:20:14Z")

</div>

give this one a try (lots of log spam, but it just worked for me end-to-end)

it is still doing funny movement between measurements. In my case the measurement points are 50mm apart and it goes off about 100-150mm in a seemingly random direction before coming back to the next location.

edit: it would help if I included the link 🙂

> <https://github.com/BarbourSmith/FluidNC/actions/runs/18434499431>

---

_[View the full topic](https://forums.maslowcnc.com/t/testing-needed-automatic-calibration-grid-generation/24975)._