Maslow Home Maslow Community Garden Newsletter

The big router lift topic

#1

Many people want to see if they can fit their existing routerto a Maslow. Or just need an alternative for the AEG/Ridgid for whatever reason

I decided to create this topic to post images of all kinds of router lift options out there. mainly the ones that where created for router tables, to see if there are cheap / simple solutions out there that can be used.

What routers look like good candidates?
Are there existing mod kits that can be used?
DIY slides with ACME screws?
Drawer slides?

Anything goes!

If there are really nice solutions then they could be given their own thread.

This topic can be a shootout.

Lest have a start:

Hitachi M12V


http://www.eaglelakewoodworking.com/post/motorized-router-lift.aspx
http://www.eaglelakewoodworking.com/galleryview.aspx?sfdr=projects/MotorizedRouterLift&ttl=Motorized%20Router%20Lift%20Picture%20Gallery

Pro’s:
Cons:
Facepalms:

Have a go at it!

EDIT:
A more modern version of the Hitatchi M12V looks like this:

the Ridgid’s router base makes more sense in many ways, but this Hitachi seems to be hackable enough to be usefull.

EDIT:


that’s another interesting hack of the same router

Hitachi KM12VC could also be an interesting machine, thisone is about the same style as the AEG/Ridgid
image

3 Likes
Router Recommendation (Australia)
#2

another approach

http://woodgears.ca/router_lift/version1.html
image

image
this almost looks like a Maslow sled already. :slight_smile:

1 Like
#3

just a note that there’s a wiki page for this as well.

#4

i hope this topic can spark a few ideas for different routers. trying to get more minds involved in z-axis development.

Once a certain router is actually tested on a Maslow then it can be added to the wiki. By having a discussion about routers we might be able to make it more easy to figure out what to look for in a router when it comes to z-axis choices.
Most stores have only a limited selection. and there isn’t really a try-before-buy option. I guess once more people own a maslow then more good options will surface, but for now there seems to be a bit of a gap.

#5

Makita’s latest kit
image

battery powered and a plunge base…

and for small builds this could be a candidate
image

does anyone have one of these? eventually with more usefull images then de standard marketing bullshit that shows sexy angles but not the view that matters to figure out if ‘it can haz Z-lift?’.

#6

Makita’s latest kit
image

battery powered and a plunge base…

a plunge base is a drawback, not an advantage

#7

But it seems far more easy to get started then building an entire z-lift.

This is why i started this topic, to get more ideas coming in how to solve this, though i’m a bit underwhelmed of feedback so far. :smiley: I guess it will change once more people look for solutions.

A fixed lunge base is indeed a disadvantage but the ridgid (and in this case the makita’s) swappable plunge base seem to be usable. the trim base seems far more difficult to use as a z-axis.

I hope somoene can show a solution for that as those come far cheaper…

#8

This Bosch GOF1600CE

just got mentioned in the Router Recommendation (Australia) thread
I wonder if how wide the range is on the micro adust… On the older POF1600ACE the micro adjust has only a range of 1cm and that kinda makes it useless, i hope it’s different on this machine

#9

image

does anyone know the type of this router

it looks like a usable option, but is it?

#10

you would need to check if it’s turning a screw or a nut. If it’s a nut, then you may have to try and put the motor where the crank is (which would limit how far down it can go) but you may be able to use a right angle drive motor.

1 Like
#11

I did some searching and it looks like this one is modded with one of these kits.

http://www.woodworksupplies.com.au/router-raizer-kit-rz-200

The good part is that they have a list of routers that can be modded
the bad part is the price of these kits on top of everything else

Manufacturer

Axminster - AW127R / RZ 200 Kit
Bosch - 1617, 1618, 1619EVS / RZ 200 Kit
Casals - Yes Call
CMT - Yes Call
Craftsman - 27505, 27506, 27510, 27511 / RZ 100 Kit
DeWalt - DW625, DW615, DW620, DW621, / RZ 100 Kit
ELU - ELU96, ELU96E, ELU 97,ELU177, ELU 3337, ELU3338, ELU3339 / RZ 100 Kit
Fein - RT1800 / RZ 200 Kit
Freud - FT2000, FT200E / RZ 100 Kit
Hitachi - TR12, M12V / RZ 100 Kit
Makita - 3612B, 3612BR, 3612C / RZ 100 Kit
Metabo - Yes Call
Porter Cable - 7529, 7538, 7539, 693, 6931 / RZ 100 Kit
Ryobi - RE600, RE500 / RZ 100 Kit

#12

Today i found this one

I hope this image works as my connectivity is extremely slow today

#13

And tight fitting base from amazon.com for the Bosch above :slight_smile: https://www.amazon.com/Bosch-MRF01-Router-Fixed-Routers/dp/B00AEBXH7S

1 Like
#14

Vertex,
As noted in the Australian Router thread the Bosch fixed base has an after lock fine adjustment of 41mm, the fixed base has 32mm (±16mm).

I have the fixed base under test and started to pull it apart. Waiting on my Z-Axis kit so I can try mounting the Z-Axis motor.

Stu

1 Like
#15

I had not seen this one before

This looks like another candidate

#16

That should work well. the only question is the total amount of travel, but it should be enough since it’s designed for router tables

#17

https://www.boschtools.com/us/en/boschtools-ocs/router-attachments-medium-large-routers-ra1165-27301-p/

Cant find the actual full travel depth distance, but at least there is a full manual for this available.

RA1172AT seems to be a comparable base it also has the same fine adjustment and hex wrench option

#18

note that this has the same issue as the ridgid, it’s designed to have the clamp
opened, adjust the depth, then close the clamp.

you will need to loosen the clamp so that when it’s closed, things move, but not
too much

1 Like
#19

Hello, New to Maslow, haven’t even ordered yet.
I am still organizing my shop and researching what I need/want.

I have the Hitachi KM12VC pictured above and didn’t want to move to another router and I like the idea of being able to do very fine adjustments. That led me to research router Lifts.

I have settled on getting the JessEm ROUT-R-LIFT II I have seen them as low as 175.00. They also fit a wide variety of routers, to find that you have to lookup the Installation guide.

If you are going to want to pull this from your rig and drop it in a table you will want to make sure that it is compatible with the table. Most manufacturers also sell tables and they have a proprietary sized hole that there lift fits into.

Just my thoughts.