# Throwing my hat in the sled modification ring

**URL:** <https://forums.maslowcnc.com/t/throwing-my-hat-in-the-sled-modification-ring/193>\
**Category:** Technical Details\
**Created:** [July 21, 2017, 6:10pm UTC](https://forums.maslowcnc.com/t/throwing-my-hat-in-the-sled-modification-ring/193 "2017-07-21T18:10:49Z")\
**Posts on this page:** 1\
**Showing post:** 292

<div class="post-metadata">

**Author:** ![pillageTHENburn](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/pillagethenburn/32/407_2.png) [@pillageTHENburn](https://forums.maslowcnc.com/u/pillageTHENburn)\
**Post date:** [August 29, 2017, 10:22pm UTC](https://forums.maslowcnc.com/t/throwing-my-hat-in-the-sled-modification-ring/193/292 "2017-08-29T22:22:10Z")

</div>

Here’s a symmetrical 45˚ design that should have no problems:

 ![45 mount extremes](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/1X/241353b4e1133ace6929c6a14cf9abeb112d67ec.png)

Here’s a slightly more complicated version but it’s more compact by a couple inches if that’s what you’re after:

 ![45 mount extremes compact](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/1X/fddf2e40de29956a2560e3e0449ebdedc6b0feab.png)

---

_[View the full topic](https://forums.maslowcnc.com/t/throwing-my-hat-in-the-sled-modification-ring/193)._