# Tool Change Pause

**URL:** <https://forums.maslowcnc.com/t/tool-change-pause/13818>\
**Category:** Feature Request / Development\
**Created:** [June 27, 2020, 2:36am UTC](https://forums.maslowcnc.com/t/tool-change-pause/13818 "2020-06-27T02:36:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bits\_into\_things](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@bits\_into\_things](https://forums.maslowcnc.com/u/bits_into_things)\
**Post date:** [June 27, 2020, 2:36am UTC](https://forums.maslowcnc.com/t/tool-change-pause/13818/1 "2020-06-27T02:36:34Z")

</div>

GroundControl supported pausing for tool changes, but my last cut with WebControl didn’t pause. Could we add support for this? Or, does support already exist and I’ve misconfigured it?

---

<div class="post-metadata">

**Author:** ![kiklo](https://avatars.discourse-cdn.com/v4/letter/k/bcef8e/32.png) [@kiklo](https://forums.maslowcnc.com/u/kiklo)\
**Post date:** [December 17, 2021, 8:49am UTC](https://forums.maslowcnc.com/t/tool-change-pause/13818/2 "2021-12-17T08:49:50Z")

</div>

HI.  
Mine does halt for tool change. ( You may look into my earlier post on the subject.)  
You might want to test an other slicer to be sure it insert the right G-code.?  
I use the webbased Kiri:moto. Works for me.