# Transporting Plywood Carrier/Rackmount

**URL:** <https://forums.maslowcnc.com/t/transporting-plywood-carrier-rackmount/21171>\
**Category:** No Judgement\
**Created:** [May 23, 2024, 2:17am UTC](https://forums.maslowcnc.com/t/transporting-plywood-carrier-rackmount/21171 "2024-05-23T02:17:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Frank\_Wiebenga](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/frank_wiebenga/32/22326_2.png) [@Frank\_Wiebenga](https://forums.maslowcnc.com/u/Frank_Wiebenga)\
**Post date:** [May 23, 2024, 2:17am UTC](https://forums.maslowcnc.com/t/transporting-plywood-carrier-rackmount/21171/1 "2024-05-23T02:17:17Z")

</div>

I’ve been using the Menard’s rental truck to shuttle plywood from the store, but it’s starting to add up so I designed a little carrier for my Subaru Outback Wilderness to carry one or two at a time. That should be well below the load limit for the racks.

I 3d printed a jig to use the palm router to match the profile of the rails for the top. Then used the mirror, 3d printed, attached to some 1/8" bar stock, and a healthy amount of gorilla glue.

 ![PXL_20240523_014719281](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/b/d/bdce63762df3518d2283c92acbb273099e1ca639.jpeg)

 ![PXL_20240523_014536672~2](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/b/3/b37045882b1963574e8595db1aa5f745371dc1f0.jpeg)

If you want the files for the jig or profile of the aero bars I posted them on [Printables](https://www.printables.com/model/888924-rhino-rack-plywood-carrier)