# Trying to get my head around everything.. Bought a 2nd hand rig

**URL:** https://forums.maslowcnc.com/t/trying-to-get-my-head-around-everything-bought-a-2nd-hand-rig/19562
**Category:** Technical Details
**Created:** [November 21, 2023, 12:29pm UTC](https://forums.maslowcnc.com/t/trying-to-get-my-head-around-everything-bought-a-2nd-hand-rig/19562 "2023-11-21T12:29:09Z")
**Posts on this page:** 1
**Page:** 2

<div class="post-metadata">

### Author: ![c00nphrog](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/c00nphrog/32/13632_2.png) [@c00nphrog](https://forums.maslowcnc.com/u/c00nphrog)
#### Post date: [November 30, 2023, 9:25pm UTC](https://forums.maslowcnc.com/t/trying-to-get-my-head-around-everything-bought-a-2nd-hand-rig/19562/21 "2023-11-30T21:25:57Z")

</div>

As far as frames go (for old and new), I built a wall mounted frame that is on hinges with fold out legs that would put the angle of the surface at 15deg. when not in use, it folds flat-ish to the wall to allow extra space. The image is when I started putting it together at my old house. The center is empty in the image because I used the main part of the old standing frame to fill that in. I know it is 10’ wide, not sure how tall, but I added skirting around the outer parts of it once I attached the spoil board. In my new house, I have flat sheets stored behind it. For the original Maslow, the top beam sticks out on the same 2x4 pieces from the original frame plan, I just added more for support and stability. They can easily be removed to allow the Maslow 4 anchor points to be installed at the 4 corners.

 ![Maslow Frame](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/c/c/cc6aa71a12524a729a6d057d65690645002bbef8.jpeg)

I found another pic, though it doesn’t show the top of it, and I have it cutting a tree out for my son’s high school band about a year and a half ago.

 ![Maslow Cutting](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/8/9/894ca9f6b17c114792e01e2f4a655ace6ce5e979.jpeg)

[Previous page](https://forums.maslowcnc.com/t/trying-to-get-my-head-around-everything-bought-a-2nd-hand-rig/19562.md?page=1)